REPLACE/REMOVE CYLINDER HEAD Questions
Head Cylinder Swap
Have A 2.2 Ecotec Non Vvt That Is Done And I Found A 2.2 Ecotec Same Year, But This Is A Vvt. What Are The Possibility's To Use The...
Asked by Pepepancho
Do I Need To Reset The Timing After Replacing The...
Just Replaced Head Gasket And Picked Up A Another Head For My Car. My Question, Do Or Will I Need To Reset The Timing Now? I Didn't Move...
Asked by Stacy Zimmerman
Head Replacement
Engine Is A 1.6 Liter. I Just Got My Head Back From The Shop. I Am Trying To Figure Out The Best Way To Put My Camshafts Back In And Tighten...
Asked by Andre Battis
Replaced Heads Problems
I Just Replace My Heads And Starts Right Up, Idles Fine But When I Drove Around Block It Stalled When I Gave It Gas. I Got It Home And...
Asked by Kenny Roope
How To Remove The Cylinder Head?
The Timing Belt Broke And Bent Valves, Now I Need To Remove The Heads, Have A Valve Job And Replace The Heads.
Procedure For Removing The...
Asked by marty.mcclearty
Removing The Cylinder Head And Timing Chain And...
Need Any Help. I Can Get To Remove This Dual Cam Head And Timing The New Chain And Any Special Way To Treat The Cams? Any Downloads Would...
Asked by bonesmike
Cylinder Head Replacement?
I've Replaced The Following: Distributor, Spark Plugs, Wires And Ignition Coil And Still No Spark. I Used A Test Light And I Have Power...
Asked by taylormade123
Remove And Reinstall Cylinder Head
How To Remove And Reinstall Xj8 3.2 V8 Cylinder Are There Any Pictures Or Drawings To Show What To Do?
Really Appreciate Your Help.
...
Asked by jag2000
Replaced Right Passenger Head Cannot Get Timing Right
I Replaced A Head On My 4.7 Because One Of The Casings Was Cracked And Threw A Rocker Off. I Have Built And Torn Down 5 Different Times With...
Asked by Markcum1125