CRANKSHAFT SENSOR Questions

The Car Stops At Random Any Temperature No Set Amount Of Kms Driven. When It Stops It Has Spark, Pulsing Injectors , And Good Fuel Pressure...

Originally Told The Ignition Switch Was Issue, Changed And Did 30 Minute Relearn, Got Scanner Code P0336, Changed Crankshaft Position And...

Crankshaft Position Sensor Correlation Code Pops When I Crank The Vehicle But Won't Pop When It Is Running. Turn It Off And Re-crank It...

Turns Over Won't Start ,told It Was Crankshaft Positioning Sensor.

Crankshaft Positioning Sensor Blows Again. This Is The Fourth Sensor Put In It Keeps Blowing On Me. I’m Really Not Sure If It’s The...

I Have An Intermittent Starting Problem. After A Drive And A Short Stop, The Van Will Sometimes Not Run. If The Drive Is Very Short, Less...

So I Have Taking Off The Crank Shaft Pulley/harmonic Ballancer And Also The Plastic Cover So I Can Get To My Crankshaft Position Sensor.....

When I Put The Pulley Back On The Car How Many Foot Pounds Do I Torque The Bolt To And Do Have To Get A New Bolt For The Pulley? I Read...

My Crankshaft Position Sensor Is Smaller In Diameter Than The Design One. I Was Told That The Brass Cup Inside Needs To Come Out. Need...

I Got P09335, P0336. And P0341 Codes. I Replaced The Camshaft And Crankshaft Sensors And Still Get The P0336 Code And It Wont Start. Thanks...