CRANKSHAFT SENSOR Questions

I Have A 1995 Firbird V6 3.4 Is There A Way To Check The Crank Positioning Sensor I Have No Spark I Had My Ign Mod Check As Well As All My...

Had Code For Bank 1 Sensor 2.. Changed O2 Sensor Under Front Of Motor By The Passenger Side And Now It Wont Start. I Checked The Fuses...

It Broke Off In The Engine Block. Can Push Back Down On To The Oil Pan?

If The Ckp Sensor Is Damaged, Can My Innova Scan Too Still Read The Rpm's?

Bought New Sensor Fit In Car But Code Still Coming Up As P0335.

I'm Getting No Fire On Two Coils. I Had It Put On The Computer A Few Weeks Ago And 300 Through 306 Popped Up On The Computer Telling Me...

I'm Buying A Car And Was Told The Crankshaft Position Sensor Is Out So The Car Rev Limits At 5,000 And Takes A Little Bit Of Cranks To...

Changed Crankshaft Position Sensor And Three Way Wire Connector Since The Wires Were Bare And Gave A P0336 And Now Vehicle Wont Start It...

1998 Isuzu Amigo 2.2l Only Receiving 1.1 Volts On The Crankshaft Position Censor Circuit, Rather Than The Required 5 Volts. Why? On The...

So I Bought The Carl Listed Above Used About 3 Weeks Ago. Now 2 Weeks Ago I Tried Starting The Car And It Wouldn't Even Start The Motor...