GMC Engine

Browse GMC Engine questions and answers. Choose a question that matches your symptoms.

4,523 discussions


Code P0011 VVT (Variable Valve Timing), Where Is The...

2008 GMC ACADIA
I Ran A Code Scanner, And It Came Back With The Code P0011 And Said Roughly (vvt Solenoid Intake Bank 1). So, I Bought A Replacement...
1 ANSWER
5 IMAGES
Asked by Jway

No Communication?

2008 GMC YUKON
I Have Had An Intermittent Problem With My Vehicle Losing Communication. No Crank No Start Door Unlocking And Locking And So On. I Was At...
3 ANSWERS
9 IMAGES
Asked by Brandon Watson

Code Repair Problems, Not Starting?

2008 GMC ACADIA
Body Throttle Was Dirty With Oil. I Cleaned It Then Put Code Ready On And These Codes Came Up And I'm Not Sure If I Just Need To Replace...
3 ANSWERS
3 IMAGES
Asked by Nikala

No Power Up Steep Hill, Low Speed?

2008 GMC SIERRA
I Do A Lot Of Fishing In The Back Country. My Trailer Weighs 1,800 Lbs And Another 500lbs Of Gear In The Bed In The Bed. My Truck Works...
1 ANSWER
Asked by Happyfisher

Oil Leaking Into Cold Air Intake?

2008 GMC YUKON
I Have The Vehicle Listed Above Xl Denali. The Short Version Of The Problem Is I Have Oil Coming From The Passenger Side Valve Cover "...
45 ANSWERS
1 VIDEO
21 IMAGES
Asked by Bboylilrob

Codes P1174 And P1175, Vacuum Leak?

2008 GMC ACADIA
While Checking For A Vacuum Leak Using A Smoke Machine. While Running The Smoke Though The System I Noticed Smoke Was Coming Out Of The Oil...
5 ANSWERS
1 VIDEO
1 IMAGE
Asked by Crzyfo0

MAP Sensor Problem?

2008 GMC ENVOY
So, I Bought The Vehicle Listed Above That Was Missing The Map Sensor. I Bought A Sensor And Installed It But Now The Vehicle Won’t Run....
1 ANSWER
9 IMAGES
Asked by Rickybolen89

Gas Fumes?

2008 GMC YUKON
Smell Gas Fumes, Lower Fuel Mileage, Reduced Acceleration.
1 ANSWER
Asked by Scott-Yukon

When I Turn The Key To Crank The Engine It Keeps...

2008 GMC SIERRA
Engine Keeps Cranking.
3 ANSWERS
Asked by Joseph watson

Engine Cranks But Does Not Start?

2008 GMC ACADIA
The Starter Is Turning I Know This Because I Can See The Belt Turning. But Just The Belt Is Turning It's Not Turning The Engine Over.
3 ANSWERS
Asked by bwurmie

Browse other repair topics

Browse by repair topic
SymptomsAir FilterAir Intake Temperature SensorAir Intake TubeBlockCamshaftComputerCoverCrankshaftCrankshaft PulleyCylinder HeadTickDrain PlugFlexplateFlywheelGround StrapHarmonic BalancerIdentificationIdle Air ControlIntake ManifoldInterchangeKnockMAP SensorMass Air Flow SensorMountOil LeakOil ChangeOil CheckOil CoolerOil Fill CapOil FilterOil PanOil Pressure SensorOil PumpOxygen SensorPistonRebuildReplace/RemoveSerpentine BeltStarterSuper ChargerThrottle BodyTiming BeltTiming ChainTune-upTurboVacuum Hose DiagramWiring

    Can’t find your issue?

    Ask a new GMC question