GMC Engine

Browse GMC Engine questions and answers. Choose a question that matches your symptoms.

4,523 discussions


Misfire?

2008 GMC SIERRA
I Was Told This Could Be A Dod Problem, But I Don't Believe It Is Because There's No Lifter Ticking. I Pulled The Plug Wires Off One...
1 ANSWER
Asked by Kj@tripower

Intermittent No Crank No Start Issue

2008 GMC YUKON
But Starts When I Connect Battery To Starter Fuse. Has Gotten Progressively Worse Over Time. Once It Starts It Seems To Run Fine. When The...
5 ANSWERS
3 IMAGES
Asked by Gregg Swan

After Replacing The Fuel Pump It Will Not Stay Running

2008 GMC SIERRA
Replaced The Fuel Pump In My Truck Now It Doesn't Seem To Be Getting Power. Starts But Shuts Off. Scanning Says Maybe The Fuel Pump...
5 ANSWERS
10 IMAGES
Asked by Amandamarie363

Keep Getting Crank Sensor Code Po335

2008 GMC SIERRA
Po335 Is The Code I Keep Getting. Replaced Sensor 3 Times With Original Ones All From Different Stores. Replaced Pigtail And The 3 Wires...
1 ANSWER
8 IMAGES
Asked by Ken Cooley

Will Not Start

2008 GMC ACADIA
Two Weeks Ago I Just Had My Starter Replaced, Tune Up, New Fuel Pump And Fuel Flush. I Got The Starter Done Because My Car Wouldn't Turn...
1 ANSWER
Asked by Rae8

Rough Idle At Startup

2008 GMC CANYON
When Starting The Truck, It Sometimes Idles Real Bad, Almost Like It'll Stall Or Something. After About 5 Seconds Though It Goes Back To...
1 ANSWER
Asked by KC27

Throttle Body Not Holding Relearn

2008 GMC ENVOY
My Vehicle Starts At Times Very Rough And I Had It In Shop Last Week , It Was Hooked To A Computer Because Check Engine Light Was On And It...
3 ANSWERS
Asked by Delllackey

Multiple Error Codes/ No Crank/ No Start

2008 GMC ACADIA
B1000-34, B1000-35, B1000-43 B1011-71 B1370-06 B1380-06 B320a-4b C0561-71 U0100-60 U0101-00 Replaced Plugs And Coil Packs...
3 ANSWERS
13 IMAGES
Asked by Rhudson.813

Cranks Will Not Start And Code P0011

2008 GMC ACADIA
Camshaft Position "a" Timing Over Advanced Or System Performance Bank 1. I'm Having Trouble Finding Where The Sensor Is Located...
1 ANSWER
1 IMAGE
Asked by MarcusGonz01

Stalling At Low Speeds And Stops

2008 GMC YUKON
My Suv Has Low Idle (500 Rpm), Sporadic Shifting Between 2,500 Rpm's And 1,000 Rpm's. Sometimes Will Go From 2500 To 1000 And Level...
5 ANSWERS
1 IMAGE
Asked by chriskimgibbs

Browse other repair topics

Browse by repair topic
SymptomsAir FilterAir Intake Temperature SensorAir Intake TubeBlockCamshaftComputerCoverCrankshaftCrankshaft PulleyCylinder HeadTickDrain PlugFlexplateFlywheelGround StrapHarmonic BalancerIdentificationIdle Air ControlIntake ManifoldInterchangeKnockMAP SensorMass Air Flow SensorMountOil LeakOil ChangeOil CheckOil CoolerOil Fill CapOil FilterOil PanOil Pressure SensorOil PumpOxygen SensorPistonRebuildReplace/RemoveSerpentine BeltStarterSuper ChargerThrottle BodyTiming BeltTiming ChainTune-upTurboVacuum Hose DiagramWiring

    Can’t find your issue?

    Ask a new GMC question