GMC Computer

Browse GMC Computer questions and answers. Choose a question that matches your symptoms.

146 discussions

No Power To OBD2 Port?

2018 GMC SIERRA
Failed Inspection Because There Is No Power To Port So Can't Do Ma Emissions Test. Contacts Look Good, Auxiliary Power Ports Have Power...
3 ANSWERS
2 IMAGES
Asked by mlucas47

Buying Used - Question About Something Carfax Says

2016 GMC ACADIA
Looking At A Used 2016 Gmc Acadia. Carfax Says One Owner, Shows As A Personal Lease. Weird Things That I Don't Understand: 1. Why...
3 ANSWERS
Asked by jflarkin

Limp Mode, Code P2138

2014 GMC TERRAIN
The Car Drives Fine Then It Goes Into Safe Mode, Loses Power And Reduced Engine Power, Disabling Traction Control, Service Stabilitrak...
1 ANSWER
1 IMAGE
Asked by mwilsing

StableTrek Needs Servicing?

2013 GMC TERRAIN
This Popped Up In Message Center “reduce Engine Power”. Now The Car Won’t Start And When I Put A Code Reader On It All Kinds Of Codes...
1 ANSWER
Asked by CAM61

Code U0100 Service Stabil Trac And Reduced Engine...

2012 GMC TERRAIN
It All Started With A Service Stabil Trac And Reduced Engine Power The Codes I Received Were P0191fuel Rail Pressure Sensor And P0506 Idle...
3 ANSWERS
6 IMAGES
Asked by ddschmidt50

Traction Control And Engine Light Turned On Followed...

2011 GMC YUKON
My Vehicle Listed Above Xl Model Traction Control And Engine Light Came On At Same Time Followed By Reduced Engine Power. The Car Then...
1 ANSWER
Asked by jwtaylor4112

Where Is The Fuel Pump Module Located?

2011 GMC TERRAIN
I Had Replaced My High-pressure Fuel Pump And Now I Need To Replace My Fuel Pump Module But Can’t Seem To Find Where It Is Located.
1 ANSWER
3 IMAGES
Asked by Jmhern

OBD Port Not Working?

2011 GMC SIERRA
I Can't Figure Out Which Fuse My Obd Port Is Connected To. I've Looked For A Cigarette Lighter Fuse And Every Other Fuse That I...
3 ANSWERS
3 IMAGES
Asked by Galaxyal8230

How To Program A New ECM?

2011 GMC TERRAIN
Installed A New Programed Ecm, Tried To Program Key To New Ecm But The Anti-theft Light Does Not Stay On When I Put Key In The On Position....
10 ANSWERS
1 IMAGE
Asked by Shelly Meador

Control Module Code U0073

2011 GMC ACADIA
Starts And Then Turns Off, Giving The Code U0073.
1 ANSWER
7 IMAGES
Asked by ariv

Browse other repair topics

Browse by repair topic
SymptomsAir FilterAir Intake Temperature SensorAir Intake TubeBlockCamshaftComputerCoverCrankshaftCrankshaft PulleyCylinder HeadDipstickDrain PlugFlexplateFlywheelGround StrapHarmonic BalancerIdentificationIdle Air ControlIntake ManifoldInterchangeKnock SensorMAP SensorMass Air Flow SensorMountOilOil ChangeOil CheckOil CoolerOil Fill CapOil FilterOil PanOil Pressure SensorOil PumpOxygen SensorPistonRebuildReplace/RemoveSerpentine BeltStarterSuper ChargerThrottle BodyTiming BeltTiming ChainTune-upTurboVacuum Hose DiagramWiring

    Can’t find your issue?

    Ask a new GMC question