GMC Engine

Browse GMC Engine questions and answers. Choose a question that matches your symptoms.

4,524 discussions


No Crank No Start

1998 GMC C1500
I Was Driving Home From Work And My Truck Just Shut Off, So I Waited 5 Minutes And It Started Right Up. So Recently I Got Off Work From...
5 ANSWERS
1 IMAGE
Asked by Dagreatjake87

Cylinder One Misfire

1998 GMC SONOMA
Hello, I Have The Truck Listed Above With A 4.3 Liter Vortec. I've Just Finished Changing The Cylinder Heads And Now I Have A Misfire In...
1 ANSWER
14 IMAGES
Asked by Mr.Joshua79

Crank No Start

1998 GMC SIERRA
Okay, I Plugged A Computer To The Truck And It Tells Me The Crank Sensor. So I Buy A New One . Put It On An I Be Darn, Same Thing. What Else...
4 ANSWERS
8 IMAGES
Asked by BrandonEli

No Start Condition

1998 GMC SONOMA
The Truck Was Running Just Fine Then I Got Code For A Cam Sensor. I Did A Check On The 12v Positive And Ground And They Were Fine, But My...
7 ANSWERS
3 IMAGES
Asked by rca195203

Can You Please Tell Me How To Set The Camshaft Timing

1998 GMC SONOMA
I Have A Case Where I Had The Timing Set On The #1 Tdc But Found Out That I Had Put The Balance Shaft Gear On Backwards. So I Took Off The...
2 ANSWERS
9 IMAGES
Asked by rca195203

Will Not Start After Replacing ECM

1998 GMC SUBURBAN
I Just Replaced The Ecm And Now My Truck Will Not Start.
1 ANSWER
Asked by Travisj1988

It Does Not Want To Crank Over

1998 GMC SUBURBAN
It Started About One Month Ago When My Bar Popped Off Broke My Housing On My Transmission. So I Replaced The U Joints And Put Another...
1 ANSWER
1 IMAGE
Asked by randyagaria

TBI Power Loss At One Injector Only

1998 GMC SUBURBAN
Truck Runs Fine Then Drops A Bank Because One Injector Not Spraying, Then Runs Fine Again For A While. Injector Working Okay Because When I...
1 ANSWER
1 IMAGE
Asked by Peter Drury

Knock Sensor

1998 GMC SONOMA
I Would Like To Know If My Knock Sensor Can Alter My Timing? Everything Else Is Either New Or Adjusted Where It Is Supposed To Be, But My...
97 ANSWERS
3 IMAGES
Asked by rca195203

Misfire Cylinder Six

1998 GMC SONOMA
I Did A Top End Overhaul And Now I Have A Misfire On Number Six According To My Scanner. Plug Wires, Plugs, Distributor Is All New. I Did A...
2 ANSWERS
Asked by rca195203

Browse other repair topics

Browse by repair topic
SymptomsAir FilterAir Intake Temperature SensorAir Intake TubeBlockCamshaftComputerCoverCrankshaftCrankshaft PulleyCylinder HeadTickDrain PlugFlexplateFlywheelGround StrapHarmonic BalancerIdentificationIdle Air ControlIntake ManifoldInterchangeKnockMAP SensorMass Air Flow SensorMountOil LeakOil ChangeOil CheckOil CoolerOil Fill CapOil FilterOil PanOil Pressure SensorOil PumpOxygen SensorPistonRebuildReplace/RemoveSerpentine BeltStarterSuper ChargerThrottle BodyTiming BeltTiming ChainTune-upTurboVacuum Hose DiagramWiring

    Can’t find your issue?

    Ask a new GMC question