GMC Engine

Browse GMC Engine questions and answers. Choose a question that matches your symptoms.

4,524 discussions


Hyundai 99 - Shakes And Loses Power Upon Starting

1999 GMC OTHER
Hi! I Own A 1999 Hyundai Elantra With 85,000 Miles On It. My Car, Upon Starting, Begins To Shake Violently And Then Loses Power, I...
1 ANSWER
Asked by veronicabarry33

Problems With My 1999 S-10

1999 GMC OTHER
I Have A 1999 Chevy S-10 And I've Been Having Problems With It, And I Need A Little Advice On What May Be Wrong With It. It Has 94,000...
1 ANSWER
Asked by deplachettW

Crank Shaft Sensor Bolt Off In The Block?

1998 GMC SONOMA
Bolt Is Broke Off In Block?
2 ANSWERS
Asked by Rey Reed

Third Cylinder Is Missing And It Is Running Rich?

1998 GMC C1500
3rd Cylinder Is Missing And It's Running Rich?
1 ANSWER
Asked by buckdm@gmail.com

RPMs Shoot Up?

1998 GMC C1500
Truck Is Manual, When I Was Driving And Came To A Stop The Rpm Would Stay Up When I Took It Out Of Whatever Gear It Was In And If I Put It...
1 ANSWER
6 IMAGES
Asked by Santiago Ramirez

Engine Cranks But Does Not Start?

1998 GMC YUKON
Hasn't Started In Several Days, Has Spark But It's Weak. Fuel Pump, Filter And Line Are Good, But Seems To Not Get As Much Gas To...
1 ANSWER
2 IMAGES
Asked by Prichie

Backfiring While Accelerating?

1998 GMC SIERRA
I Just Got The Truck Listed Above Sierra K1500. It Had Been Sitting Awhile And Was Only Driven To Go Hunting. It Starts Right Up With No...
1 ANSWER
Asked by brandon.williams

Cranking, Like It Is Not Getting Fuel?

1998 GMC C1500
Had Injector Replacement And Distributor And Fuel Filter Ran Good For Little While.
1 ANSWER
1 IMAGE
Asked by Abigail Crum

Will Turn Over Fine On Its Own, But Will Not Start?

1998 GMC JIMMY
If You Jump It Off It Usually Will Start Even Though It Was Turning Over Strong On Its Own, And Once Started Usually Has No More Issues...
1 ANSWER
6 IMAGES
Asked by Chrisxxx9876

Will Not Start After Changing Computer

1998 GMC JIMMY
A Friend Was Giving Me A Jump And Connected The Jumper Cables Wrong And Fried My Computer. The Gas Gauge Was Reading Below Zero And The...
1 ANSWER
Asked by herreratino8687

Browse other repair topics

Browse by repair topic
SymptomsAir FilterAir Intake Temperature SensorAir Intake TubeBlockCamshaftComputerCoverCrankshaftCrankshaft PulleyCylinder HeadTickDrain PlugFlexplateFlywheelGround StrapHarmonic BalancerIdentificationIdle Air ControlIntake ManifoldInterchangeKnockMAP SensorMass Air Flow SensorMountOil LeakOil ChangeOil CheckOil CoolerOil Fill CapOil FilterOil PanOil Pressure SensorOil PumpOxygen SensorPistonRebuildReplace/RemoveSerpentine BeltStarterSuper ChargerThrottle BodyTiming BeltTiming ChainTune-upTurboVacuum Hose DiagramWiring

    Can’t find your issue?

    Ask a new GMC question