Ford Crown Victoria Computer
Browse Ford Crown Victoria Computer questions and answers. Choose a question that matches your symptoms.
13 discussions
OBD2 Diagram Needed
Police P71, Wires Cut On Obd2 Port. I Need Diagram To See Where They Go.
Asked by Bobcat428
Car Seems To Be In Limp Mode
Car Starts And Idles Fine, But Has A Wrench On The Screen On The Dash. There Is No Throttle Response With The Accelerator Pedal.
Asked by Donald H Schoengarth
2005 Ford Crown Victoria Identical Car, Identical...
I Have Two Identical, Used Mo State Police Crown Vics. Can The Computers Be Swapped? The Id Numbers On The Computers Are The Same. Will It...
Asked by Jermphil
2003 Ford Crown Victoria Reseting Dtc Monitor
Hello,
I Have A 03 Ford Crown Victoria Which Recently Failed Nc State Inspection. The Told Me That 4 Of The Codes Where Not Ready To Be...
Asked by qwilson
2000 Ford Crown Victoria Replacing ECM In P71
I Need To Replace The Ecm In The Car, But First I'm Trying To Do Some Research. The Number On The Current Ecm Is Yw7f-ee. I Understand That...
Asked by cdwade
P71 PCM Compatibility With My Car
Want The P. I. P71 Pcm In My Car. Trying To Ditch The Pats System, But I Can Only Find Online 2005 And Up P71 Pcm's. So Are Those...
Asked by Gavin makinson
OBD Port Cut
Need Wire Diagram For Police Interceptor Obd Port. The Wires Have Been Cut.
Asked by AdamCrownVic
Will Not Start Or Run
I Have A 1997 Ford Crown Victoria That Will Not Run. I Had A Lower Ball Joint Break On The Car And Had To Get It Towed Home I Replaced It...
Asked by dirtbag3116
Reading Code 136 Because The Catalytic Converter Is...
My Car Listed Above Is Reading Code 136 Because My Catalytic Converter Is Going Out Due To Code 332 (insufficient Egr Flow) I Replaced The...
Asked by Evander Gamble
1994 Ford Crown Victoria Start And Quick
Computer Problem
1994 Ford Crown Victoria V8 Two Wheel Drive Automatic
Do The Car Have A Crash Sensor
Asked by sirmikey13
Browse other repair topics
SymptomsAir FilterAir Intake Temperature SensorBlockCamshaftComputerCrankshaftCrankshaft PulleyCylinder HeadFlywheelHarmonic BalancerIdle Air ControlIntake ManifoldInterchangeMAP SensorMass Air Flow SensorOilOil Fill CapOil FilterOil PanOil Pressure SensorOil PumpOxygen SensorReplace/RemoveSerpentine BeltStarterThrottle BodyTiming ChainTune-upWiring
Can’t find your issue?
Ask a new Ford Crown Victoria question
