TIMING Questions
How To Set And Adjust Ignition Timing?
A Lot Of Miles On Vehicle. Figured Since I've Done Everything Else To It Needs To Be Adjusted.
Asked by azdanno04
Timing Is Off By A Lot
Could I Set My Cam Timing At Tdc Take The Belt Off And Set My Crank At Tdc To Set Timing? It's Too Off To The Point Where Nothing Else...
Asked by tools4u
1999 Ford Explorer Timing
My Timing Cassettes Broke S Well As The Balance Shaft Chain While The Engine Was Running I Have Pulled The Motor And Have Installed All New...
Asked by thowell148
Timing Stage 2 Procedure?
The Flats On The Camshafts Do Not Line Up Together. On One Side The Flat Is Up, And The Crank Sprocket Marks Are Lined Up. The Other Side Is...
Asked by Ronald DeVold
Resetting Timing
Took Apart Front Of Engine To Get Access To Timing Belt (supposedly Water Pump Was Changed But Couldn't Get Engine To Run, Engine Would...
Asked by Andrew Moyah
How To Set The Timing
I'm Trying To Set The Timing On. It Has Notches And Green Marks As Well. Can Someone Please Tell Me How To Do This? I Am No Mechanic. I...
Asked by ryleasdad0415
Car Has A Hard Time Starting
Starts Then Quickly Shuts Down, Pumping Gas Many Time To Start. Could It Be The Fuel Filter?
Asked by Arnie10Robinson
Ignition Timing
I Have A 1986 Toyota Celica Gt (2.0l 2-se Engine Sohc, Auto Transmission) And Noticed That The Timing Is Set To About 25 Degrees Before Top...
Asked by pyromenger
Timing
Is It Possible For My 1988 Ford Bronco To Jump Timing During Use? The Idle Is All Over The Place. During Initial Start-up It's Around 7-800...
Asked by Pack1973