TIMING Questions
Timing/Tuning Problem With A CJ7
1980 Cj7; Distributor Replaced; Cylinder #1 Tdc Found, Timing Notch Alligned With Tdc; Assured Distributor Finger Points To Sparkplug #1...
Asked by koebes
How To Set The Timing?
I Got A New Distributor. I Am Picking Up From The Mail. Hopefully It Contains The Solenoid Can Shaft Adjuster. Never Set Timing Before And...
Asked by azdanno04
What Is The Correct Timing
Hello, I Need To Set Timing Marks For My Vehicle Listed Above Sport Trac Dohc 3 Valve. I Am Curious About Setting The Mark For Cam Phaser...
Asked by General.motors
Setting The Timing
When The Timing Marks Are Set Correctly On The Cam Shaft Sprocket, Oil Pump Sprocket, And Balance Shaft Sprocket And The Engine Is At Tdc...
Asked by Kai creal
Timing Problem
Changed Heads, Replaced With One From 1997 Trooper 2.6. Number One And Number Four And Pistons Are Closed.timing Marks Line Up At The...
Asked by Kathy Raper
Timing Repair
Okay, I Had To Do A Timing Chain Overhaul On My The Car. The Guy That Did It Seemed To Have Done The Internal Part Correct But At The End...
Asked by Sabradell33
Setting The Timing Right
I Have A 1989 Subaru Gl 1.8l 4w/drive With Around 80,000 Miles On Its Second Motor. I Was Driving Down The Interstate Doing 75 Mph When My...
Asked by rnp992000
Jumped Time
The Car Started Backfiring. Replaced Timing Belt. Now The Key Doesn't Want To Work Or It Just Wont Stay Running.
Asked by Stephanie Devoe
Sprocket Timing, Trying To Get TDC Number One...
Rotating Engine Clockwise. Manual Rotation Stopped At 180 Degrees. Started With Cam And Sprockets All On Timing Marks (hard To Tell With...
Asked by Scott123a
Timing Jump
What Does It Mean For A Car To Jump Time? What Does It Take To Fix This Problem?
Asked by bwwwachsmann@yahoo.com