CAMSHAFT SENSOR TEST Questions
P1381 Camshaft Position Sensor 1 Circuit Malfunction
Hello, I Desperately Need Help. So I Have Used A Scan Tool And Popped Up P1381 Camshaft Position Sensor 1 Circuit Malfunction And Map Sensor...
Asked by Miguel Vargas2
No Power To Crank And Cam Sensor
When Tried To Start The Vehicle I Got No Spark After Testing All Sensors And Coil Packs I Found No Power To Crank And Cam Sensors Tested Pcm...
Asked by Speedy8305
How To Test The Crankshaft And Camshaft Sensors With A...
How Do You Test The Camshaft Sensor And Crankshaft With A Multimeter?
Asked by Robert Hayes2
Timing
*set Number One To Top Dead Center And Put A New Camshaft Sprocket On Lined Up Both Back To Flat Did Two Rotations And Intake Is Still Flat...
Asked by johnskinner1232
1997 Ford Thunderbird V-6
I Have A 1997 Ford T-bird With 47,000 Miles And V-6 Motor. While Driving At Approx. 45mph It Missed Once, Then Again, Then A Couple Of Times...
Asked by bffbpete
GM HFv6 2.8 - P0341 Intake Camshaft Sensor Bank 1...
I Had A P0341 Camshaft Sensor From Bank 1 Code. The Camshaft Sensor On These Is A Hall Effect 3 Wire Sensor. Checked The Wiring For Power...
Asked by Cloves
Seems Like The Pcm Conrtol Relay Is Bad.(the One Under...
Seems Like The Pcm Conrtol Relay Is Bad.(the One Under The Air Intake Part Of The Cruise Control) Check Engine Light Comes On After The...
Asked by David Gabriel
1996 Ford Probe Spark, Fuel, Air, And It Cranks But...
Car Died A Few Days Ago After Just Leaving Work. 240k On Car, But Only About 80k On This Engine. Background On The Car Is That It Has Been...
Asked by Element116
