Power windows not working

Tiny
SATURNTECH9
  • MECHANIC
  • 30,869 POSTS
Please understand the moderators on this website answer questions in our spare time so we dont always get right back to you. So now key in the run position at the drivers master window switcb with the passenger front window switch in the up position you should have power on the white wire with a yellow stripe. Same switch down position tan wire with a light blue stripe should have power.
Was this
answer
helpful?
Yes
No
Friday, November 10th, 2017 AT 3:42 PM (Merged)
Tiny
MARK MAKAREWICH
  • MEMBER
  • 10 POSTS
Hey there Saturn Tech I'm having the same problem I have tested and have power up to the blue wire with the black stripe on it going into the master switch on the driver side
I don't have power to both sides starting back at the 60 amp fuse underneath the hood my tester light only comes on when I touch one side
Was this
answer
helpful?
Yes
No
Friday, November 10th, 2017 AT 3:42 PM (Merged)
Tiny
SATURNTECH9
  • MECHANIC
  • 30,869 POSTS
I really need you to start your own question it's way too confusing for the people going back and fourth answering the questions and the other users looking for answers to have more then one question per post. Even if it's a similar question. Thank you in advance for your understanding.
Was this
answer
helpful?
Yes
No
Friday, November 10th, 2017 AT 3:42 PM (Merged)
Tiny
HURRICANEJACK
  • MEMBER
  • 1 POST
  • 2002 MERCURY MOUNTAINEER
Electrical problem
2002 Mercury Mountaineer 6 cyl All Wheel Drive Automatic

Which fuse controls the power windows? The owners manual doesn't mention power windows.
Was this
answer
helpful?
Yes
No
Friday, November 10th, 2017 AT 3:42 PM (Merged)
Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 109,867 POSTS
Have you checked on the inside of the fuse box cover?
Was this
answer
helpful?
Yes
No
Friday, November 10th, 2017 AT 3:42 PM (Merged)
Tiny
WILLMAR
  • MEMBER
  • 2 POSTS
  • 1997 MERCURY MOUNTAINEER
What fuse numbers are the power windows? The driver's side works fine, but the passenger and back passenger windows won't work from drivers control. The passenger window doesn't work from any controls. Please help. Cannot figure this out!
Was this
answer
helpful?
Yes
No
Friday, November 10th, 2017 AT 3:43 PM (Merged)
Tiny
CADIEMAN
  • MECHANIC
  • 3,544 POSTS
Hold the switch down and bang on the door panel with your fist. Does the Windows start operating?
Was this
answer
helpful?
Yes
No
Friday, November 10th, 2017 AT 3:43 PM (Merged)
Tiny
WILLMAR
  • MEMBER
  • 2 POSTS
Nope. Didn't work. Anymore ideas?
Was this
answer
helpful?
Yes
No
Friday, November 10th, 2017 AT 3:43 PM (Merged)
Tiny
CADIEMAN
  • MECHANIC
  • 3,544 POSTS
U OK
Was this
answer
helpful?
Yes
No
Friday, November 10th, 2017 AT 3:43 PM (Merged)
Tiny
JNOWELL514
  • MEMBER
  • 1 POST
  • 2000 MERCURY MOUNTAINEER
  • 89,000 MILES
Power window controls on drivers door will operate all 4 windows. However each door controls will not operate individual windows. Fuses seem to be good. What else can I check?
Was this
answer
helpful?
Yes
No
Friday, November 10th, 2017 AT 3:43 PM (Merged)
Tiny
MERLIN2021
  • MECHANIC
  • 17,250 POSTS
State exact problem please, Ford is specific on this for proper diagnosis thanks.
Was this
answer
helpful?
Yes
No
Friday, November 10th, 2017 AT 3:43 PM (Merged)
Tiny
DEBJL411
  • MEMBER
  • 1 POST
  • 1999 MERCURY MOUNTAINEER
  • 6 CYL
  • 4WD
  • AUTOMATIC
  • 10,000 MILES
Interior problem
1999 Mercury Mountaineer 6 cyl Four Wheel Drive Automatic 100, 00 miles

All power windows stop working all at once checked the fuse and its ok, is there a relay somewhere and where is it? What else should I check?
Was this
answer
helpful?
Yes
No
Friday, November 10th, 2017 AT 3:43 PM (Merged)
Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 109,867 POSTS
Check the main switch on the driver's door for power both in and out of the switch.
Was this
answer
helpful?
Yes
No
+1
Friday, November 10th, 2017 AT 3:43 PM (Merged)

Please login or register to post a reply.

Sponsored links