SPONSORED LINKS

1992 Dodge Spirit head gasket

Tiny
MIKE7342
  • MEMBER
  • 1992 DODGE SPIRIT
  • 4 CYL
  • FWD
  • AUTOMATIC
  • 123,000 MILES
I recently blew the head gasket on my car
and I was just wondering what would cause this to happen. There was plenty of engine coolant.

i recently changed my plugs but never gapped them could not gapping the plugs cause this to happen.

also if I change the head gasket will that solve the problem or will I have the head machined and change some bearings?
SPONSORED LINKS
Sunday, December 23rd, 2007 AT 4:26 PM

1 Reply

Tiny
MHPAUTOS
  • MECHANIC
  • 31,937 POSTS
Hi there,

A head gasket can blow for many reasons, if the car was not overheating before hand (the most common cause) it could of been a flaw in the gasket, a problem with the head bolts loosing tension, sometimes you never know. The head should be checked for warp and straightened and machined before fitting, Block should be clean and it is a good policy to replace head bolts, even if not torque to yield type. Clean the radiator and replace thermostat and you should have no problems.

Mark (mhpautos)
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Sunday, December 23rd, 2007 AT 5:33 PM

Please login or register to post a reply.

Related Cylinder Head Gasket Blown Content

Cylinder Head Gasket Blown Test
GUIDE
Cylinder Head Gasket Blown Test
Diagnosing a blown head gasket in an automotive engine requires a systematic approach to ensure accurate results. This guide will walk you through the necessary steps to...
VIEW MORE

Sponsored links