Turn signal troubles?

SATURNTECH9

MECHANIC
30,869 POSTS

Discount code is 5749533551276203 put it in the order screen where it says how did you hear about us box.

Was this

answer

helpful?

Yes

Sunday, August 9th, 2020 AT 11:30 AM (Merged)

ROB HESS2

MEMBER
8 POSTS

I got the multimeter from my buddy but he didn't give that thorough instructions on how to use it. Where do I check in the headlight? And it has a manual knob on the multimeter? Where do I set it at for testing?

SPONSORED LINKS

Was this

answer

helpful?

Yes

Sunday, August 9th, 2020 AT 11:30 AM (Merged)

SATURNTECH9

MECHANIC
30,869 POSTS

https://www.2carpros.com/articles/how-to-use-a-voltmeter

I posted how to use a multi meter you need to unplug the headlight assembly and measure the resistance from one end of the headlight harness to where the bulb plugs in.You can match up the colors of the wires.You should see two ohms or less on each of the two wires.

Was this

answer

helpful?

Yes

Sunday, August 9th, 2020 AT 11:30 AM (Merged)

ROB HESS2

MEMBER
8 POSTS

Thanks dude! I didn't even need to use the multimeter. A wired wasn't connecting to The clip in the middle so I spliced it to the the connecting wire and capped it. Works like it never had a problem. Now once I order the wipers and install them I'll have a driveable car

Was this

answer

helpful?

Yes

Sunday, August 9th, 2020 AT 11:30 AM (Merged)

SATURNTECH9

MECHANIC
30,869 POSTS

Good to hear you will like the dorman wiper transmission my niece has had hers in her car for a few years now probably longer then I even realize. Time flies by so quickly these days.

SPONSORED LINKS

Was this

answer

helpful?

Yes

Sunday, August 9th, 2020 AT 11:30 AM (Merged)

SATURNTECH9

MECHANIC
30,869 POSTS

Also tell all your friends about our website

Was this

answer

helpful?

Yes

Sunday, August 9th, 2020 AT 11:30 AM (Merged)

TJJORS

MEMBER
2 POSTS
2003 SATURN ION
2.2L
4 CYL
2WD
MANUAL
145,000 MILES

I have checked all the fuses. Checked all the bulbs and relays. It doesn’t show on the inside of the fuse box a fuse for blinkers. I have checked to see if there is power going into the multi-function switch. And 3 of the leads have power. But there is no blinking or noise. My fan for heat/ac didn’t have power either. Not does my trunk button. Not sure what else doesn’t work. I was told the cooling fan doesn’t want to work sometimes. Someone suggested the BCM is bad. I don’t want to waste money if it’s something else. I just don’t know what to do can anyone help?

Was this

answer

helpful?

Yes

Sunday, August 9th, 2020 AT 11:30 AM (Merged)

JACOBANDNICKOLAS

MECHANIC
109,872 POSTS

Hi,

Based on your description, it does sound as though the body control module is the cause. If you look at pic 1, I highlighted output for the blinkers. What I suggest is to simply check if there is power out from the BCM. Also, check to make sure the ground (pic 2) is in good condition and not damaged or corroded.

Let me know what you find.

Joe

Images (Click to make bigger)