Mercury Engine

Browse Mercury Engine questions and answers. Choose a question that matches your symptoms.

2,574 discussions


Dying And Running Rough

1999 MERCURY VILLAGER
My Villager Was Running Fine. Had Routine Oil Change. Going Down Highway Started Running Rough And When I Pulled Off Rd It Died. Thought I...
3 ANSWERS
Asked by KyMoonbeam

Does The 3.3 Engine Normaly Bend Valve When The Timing...

1999 MERCURY VILLAGER
Does The 3.3 Engine Normaly Bend Valve When The Timing Belt Goes Or Is It A None Interferance Engine
2 ANSWERS
Asked by Anonymous

Engine Starting To Idle Too Slow...7 Or 800 Rpm, Down...

1999 MERCURY TRACER
Engine Starting To Idle Too Slow...7 Or 800 Rpm, Down From About 1200 Rpm....no Gradual Difference, Just Started....slow Then Dies...4 Cyl
1 ANSWER
Asked by crgvnc

I Keep Getting Code 1504 And 1506. High Idle. I Read...

1999 MERCURY TRACER
I Keep Getting Code 1504 And 1506. High Idle. I Read Somewhere If U Disconnect The Iac And There Is No Change In Idle Speed, It Could Be The...
1 ANSWER
Asked by john6619

Had It Hooked Up To.compt. At Advance N Says Intake...

1999 MERCURY COUGAR
Had It Hooked Up To.compt. At Advance N Says Intake Runner Control. That Its Stuck Open That Open Or Shorted Cicuit Probable Cause. But The...
5 ANSWERS
Asked by Anonymous

The Air Bag Light Popped On And Now The Van Will Not...

1999 MERCURY VILLAGER
The Air Bag Light Popped On And Now The Van Will Not Start. Please Help
1 ANSWER
Asked by Anonymous

What Is The Drive Cycle.

1999 MERCURY COUGAR
What Is The Drive Cycle.
1 ANSWER
Asked by Anonymous

What Fuse Powers Oxygen Sensors?

1999 MERCURY SABLE
What Fuse Powers Oxygen Sensors?
1 ANSWER
Asked by Anonymous

I Have Replaced My Belt Aligned Correctly And When I...

1999 MERCURY TRACER
I Have Replaced My Belt Aligned Correctly And When I Try To Crank The Car It Acts Like It Binds Up At First Then It Fires And Almost Cranks...
1 ANSWER
Asked by Anonymous

How Do I Set The Timing On A 2.0 Liter With Variable...

1999 MERCURY SABLE
How Do I Set The Timing On A 2.0 Liter With Variable Valve Timing Camshaft I Also Need To Know The Location Of The Plug For The Crankshaft...
2 ANSWERS
Asked by ko150

Browse other repair topics

Browse by repair topic
SymptomsAir FilterAir Intake Temperature SensorAir Intake TubeBlockCamshaftComputerCrankshaftCrankshaft PulleyCylinder HeadFlywheelHarmonic BalancerIdle Air ControlIntake ManifoldInterchangeKnockMAP SensorMass Air Flow SensorMountOil LeakOil ChangeOil Fill CapOil FilterOil PanOil Pressure SensorOil PumpOxygen SensorPistonRebuildReplace/RemoveSerpentine BeltStarterSuper ChargerThrottle BodyTiming BeltTiming ChainTune-upVacuum Hose DiagramWiring

    Can’t find your issue?

    Ask a new Mercury question