GMC Yukon General
Browse GMC Yukon General questions and answers. Choose a question that matches your symptoms.
80 discussions
New Motor No Power
Hi, Okay, I Had My Truck Parked For Awhile One Day Wouldn't Start Took It To A Shop He Said It's Wired Completely Wrong And Rewired...
Asked by Someguy4469
How Can You Check If The Crank Trigger Is Working?
How Can You Check If The Crank Trigger Is Working?
Asked by Anonymous
1997 Suburban Humming Sound From Rear
1997 Gmc Surburban With 87k And 5.7l. The Humming Is Present Only When The Engine Is Running, But Does Not Change Pitch With Engine Rpm. It...
Asked by bluesbro
1996 GMC Yukon 4x4 Fuse Blowing
My 4x4 Was Not Working So I Checked The Fuse Box And Found That The Fuse Was Blown. I Replaced It And Tried The 4x4 Again And It Blew The...
Asked by sucio
1996 GMC Yukon Ticking
I Started The Truck This Morning (really Cold) And The Truck Made The Normal Ticking. It Usually Goes Away About 3 Seconds After Startup....
Asked by cvsa78
Ignition A 40 Amp Fuse Blows When Key Is Turned To...
Solenoid On Starter Stuck On And Motor Cranked Until Battery Was Disconnected. Verified Solenoid Was Bad And Replaced With A New Starter....
Asked by Carl Rehm
1995 GMC Yukon Blown 4WD Fuse
System Was Working Fine, Then I Attempted To Engage The 4wd And Nothing Happened. I Checked And Found That The Fuse For The 4wd Was Blown. I...
Asked by Oldyuke95
Any Good Tips For Good Sound?
Hi. I Drive A 94 Gmc Yukon 2door And Have It Lifted Pretty High With Huge Tires, Right Now I Have The Original Exhaust System With Two Big...
Asked by pulsti
Grinding Noise When I Make A Right Hand Turn
Gmc 1999 Suburban With 102,000 Miles. When I Make A Right Hand Turn, A Grinding, Thumping Noise Starts To Occur. It Continues Even When I...
Asked by BradWB
Browse other repair topics
Can’t find your issue?
Ask a new GMC Yukon question
