GMC Jimmy Instrument Cluster Gauges Fuel Level
Browse GMC Jimmy Instrument Cluster Gauges Fuel Level questions and answers. Choose a question that matches your symptoms.
16 discussions
Oil, Fuel Gauge, Trip Light.
Car: 2001 Gmc Jimmy. When The Car Is Started The Fuel Gauge Moves From E To A 3/4 Of A Tank, Even When Filled. The Trip Light Goes Off When...
Asked by CaseyK
2001 GMC Jimmy Fuel Gauge
Fuel Gauge Always Reading Empty "low Fuel Warning" Even If The Tank Is Full. The Auto Computer Which Displays How Many Miles You Have Left...
Asked by marco672
Fuel Gauge Not Reading Correctly
The Fuel Gauge Will Go To The Top When I Top Off The Tank Or Fill It Up, But Will Not Go Below Three Quarters Of A Tank Even If I Have Only...
Asked by Pelagicide
2000 GMC Jimmy Electrical??
When Driving, Every Once In Awhile All The Warning Lights Will Come On And Stay On For A Couple Seconds Or So Then Go Out And Gas Gauge...
Asked by RexB
Fuel Gauge Will Fluxuate Back And Forth While Setting...
Fuel Gauge Will Fluxuate Back And Forth While Setting Running Or Going Down Road No Matter How Much Gas Is In The Tank, Usually 1/2 To Full...
Asked by Anonymous
2000 GMC Jimmy Fuel Gage
My Fuel Guage Stays On Full All The Time. As I Drive It It Will Come Down To A Little Over 3/4, But Return To Full. Then Everyonce In A...
Asked by rkel
2000 GMC Jimmy Hello
I Wasn't Sure What Category To Pick. I Have A 2000 Gmc Jimmy, My Gas Gauge Is Not Reading Proprely, I Can Put 15gals And It Will Read Full...
Asked by 85anna
1999 GMC Jimmy Gas Gauge
My Gauge Is Reading Empty With A Full Tank. I Took It In To Be Fixed. First They Said It Is The Fuel Sensor. They Were To Fix It. Now...
Asked by thisledew
1999 GMC Jimmy Fuel Gauge
My Car Fuel Gauge Seems To Be Fluctuating. Even If The Fuel Inside Is Full Tank. Most Times It Will Just Show Fuel Low, Whereas The Fuel Is...
Asked by Morenzzy
1998 GMC Jimmy Gas Gauge
Hi, My Motor Was Just Replaced With A Used Motor But Now My Gas Gauge Will Not Work. The Needle Stays On Empty And The Low Fuel Light Stays...
Asked by hancocktd
Browse other repair topics
Can’t find your issue?
Ask a new GMC Jimmy question
