GMC


Third Brake Light Not Working And Has No Power?

2007 GMC YUKON
3rd Brake Light Out No Power .. Check Fuses All The Fuse In Both Inside And Outside Boxes Just Because I Was There Anyways. Check Light With...
6 ANSWERS
1 IMAGE
Asked by 2007gmcyukon

Lifter Or Injector Tick?

2019 GMC CANYON
Bought This Not To Long Ago. I Know Has Lots Of Miles But Very Clean And Well Maintained. Has Ticking Noice Which I Was Told Normal...
1 ANSWER
Asked by kwikgrizz1968

Engine Shutters While Idling And Driving?

2021 GMC SIERRA
Vehicle Details: 4wd / Awd Had A Code P302...replaced #2 Coil. It Did Not Help..tuck Is Garage Kept Never Abused...just Not Understanding...
1 ANSWER
Asked by Chris Christianson

All Kinds Of Codes Popping Up Stutter Or Very Slow...

2007 GMC YUKON
Car Is Slow To Pull Off Then Just Burst Into Power And Loses It Again Stuttering Dash Is Giving Off Every Code It Can Think Of Park...
2 ANSWERS
8 IMAGES
Asked by Hogan2035

Driver Door Plug And Socket?

2016 GMC ACADIA
Water In Connector Broken Pins
1 ANSWER
Asked by horiba

Engine Stays On After Pressing Stop?

2017 GMC YUKON
Vehicle Details: 4wd / Awd The Engine Stays On After Pressing The Stop Button Like It’s Riding With The Rap System. The Radio And...
3 ANSWERS
1 IMAGE
Asked by YukonChris

Temperature Gauge/ac Button Will Flash?

2016 GMC ACADIA
So The Temp Gauge Used To Go To 210 Which Is Normal For This Car. Every Now And Then It Fluctuates Between 0-210. And Everything Still Works...
3 ANSWERS
1 IMAGE
Asked by chevy__88

P0307 Cylinder Seven Misfire?

1999 GMC SIERRA
Replaced Spark, Plug And Spark Plug Wire Replaced Coil And Injector And Pcv Valve
8 ANSWERS
1 VIDEO
3 IMAGES
Asked by hlenori

Persistent P2135 Code?

2004 GMC YUKON
Vehicle Details: Standard Transmission I Keep Getting This P2135 Code. It Started Around August Of Last Year. I Have Replaced The...
3 ANSWERS
7 IMAGES
Asked by captkcp

No Start After Pulling Engine For Timing Chain...

2008 GMC ACADIA
I Recently Purchased This Car As A Mechanic Special Due To A Loose Timing Chain Causing The Cams To Go Out Of Time. After Pulling The Engine...
1 ANSWER
2 IMAGES
Asked by Ckramlich
Ask a new GMC question