GMC


Vibration

2003 GMC SONOMA
Vibration Is Worse At High Speed And Making Right Hand Turn Seems To Almost Go Away When Braking. Checked Tire Balance And Rogers. Replaced...
5 ANSWERS
Asked by Richard Lonski

Wipers, Blower Motor, Temperature Gauge Not Working

1999 GMC SONOMA
I Am Having Electrical Problems In My Research I Found Out That The Wipers, Temperature Gauge,and Blower Motor For The Heater Take Power...
8 ANSWERS
3 IMAGES
Asked by Patrick Case

Stiff Brake Pedal

1965 GMC C3500
New Master, Rebuilt Vacuum 2018, Rebuilt Wheel Cylinders 2010. Brake Pedal Is Stiff With Zero Travel.
9 ANSWERS
Asked by conagher

Knock Sensor

1998 GMC SONOMA
I Would Like To Know If My Knock Sensor Can Alter My Timing? Everything Else Is Either New Or Adjusted Where It Is Supposed To Be, But My...
97 ANSWERS
3 IMAGES
Asked by rca195203

Clacking Engine Noise

1996 GMC SIERRA
I Had A Leak Where The Transmission Fluid Goes Into The Cooling System. I Added Stop Leak The Leak Stopped But Now I Have A Clacking In My...
10 ANSWERS
Asked by LaDonna Avera

Overdrive Not Working Properly

1996 GMC SONOMA
First, Second, Third Shift Perfect. No Overdrive. It Does Not Slip At Overdrive Range Or Rev Up At Overdrive Range. It Just Hold Steady In...
1 ANSWER
1 IMAGE
Asked by P.j.walker

Engine Knock

2005 GMC ENVOY
My Car Is Knocking Loudly. Oil Has Been Changed And Spark Plugs And Coil Packs And Almost Every Sensor In The Car. Also The Thermostat. The...
1 ANSWER
Asked by Jwilkins94

Random Misfire

2000 GMC YUKON
Changed Head Gasket, Spark Plugs, Spark Plug Wires, Distributor, Coil, Water Pump, Oil And Still Having A Random Misfire. What Else Could Be...
3 ANSWERS
Asked by Shawnspring

Mode Door Actuator Replacement

1997 GMC SUBURBAN
Air Comes Out On Floor Only. No Mid Or Defrost. I Replaced The Actuator, But No Change. I Can See That It Is Trying To Move, But Does Not...
16 ANSWERS
2 IMAGES
Asked by dmeck

Stored Codes

1987 GMC S15
The Engine Light Is Not On But I Hook My Obd 1 Scanner And It Shows That Codes Are Stored. Is That Normal Because My Scanner Won't Erase The...
1 ANSWER
Asked by lalogm1957@gmail.com
Ask a new GMC question