Dodge Upper Control Arm

Can't Remove The Bolts For The Control Arm Because Of The Strut. Dose The Strut Have To Be Removed Or Is There A Way Around That?

I Have All Four Upper Control Arm Bushings That Need To Be Replaced Need Instructions On How To Remove And Replace Them

I've Pulled Both Old Upper Control Arm Bushings Out An Pressed 1 Side In Ok.i Have That Middlebar In The Way Now An Am Having Trouble...

I'm Getting A Growl Like Noise At About 30 Mph An If I Let Up An Coast I Still Hear It..it Doesn't Matter On Turns.it Gets Louder At...

I've Managed To Get Out The Old Bushings W A 3-jaw Puller (i Changed It To A 2 Jaw See Pic) Then A Big C Clamp On 2nd One. I Pressed In...

The Ball Joint In My Rear Upper Control Arm Went Out On Side Of Road. I Was Wondering How To Get The 3 Bolts On Top The Cross Bar Of The Arm...

I Have Been Trying To Find A Place To Buy A Driver Side Upper Control Arm Bracket And Since It Is Welded To The Frame It Has Rusted Away. I...

After Changing Out The Right/left Wheel Hubs(the Noise Was So Bad It May Have Covered Up This Problem). I Started To Notice A The Sound When...

What Is The Procedure For Replacing The Upper Control Arm Bushings? Can I Do It Myself, Or Does It Have To Be Done By A Dealer Or Repair...

The Upper Control Arms Are Bad I Cannot Find Replacements Everyone That I Find The Screw In Ball Joints The Thread Is Worn Out. So Every...