Dodge Electrical
Browse Dodge Electrical questions and answers. Choose a question that matches your symptoms.
1,498 discussions
Pinout Charts For The Back Of The TIPM Needed?
Transmission Stop Shifting, Governor Pressure Goes To 60 Lbs When In Drive.
Asked by Troy Clemmons
Invalid Key Code
How Do I Get The Invalid Key Code Taking Off. I Have The Factory Key For The Truck. I Rebuild The Engine And That Coded Came Up. I Do Have A...
Asked by Michael Rainey jr
Ignition Switch Wiring Diagram Needed?
The Key Switch Sometimes Works Sometimes Like I Have To Let Off And Hit The Key Again At Start Up. So, I Am Trying To Put In A Push To Start...
Asked by BrandonW2022
Fuse Location For Windshield Wipers Needed
Windshield Wiper Control Handle Broke Completely Off And Now My Wipers Stay On All The Time. I Don't Have The Owner's Manual And I...
Asked by Andrea Sweet
After Disconnecting The Battery Multiple Accessories...
Everything's Been Going Nuts At First All I Was Doing Was Unhooking The Battery Completely And I Was Replacing Some Fuses. When I Went...
Asked by mattcarey1655
Can I Install A Used TIPM And Do A Hard Reset?
I Believe The Tipm To Be Bad Can I Put A Used One In My Car If The Numbers Match Identically? And Can I Do A Hard Reset Instead Of Going To...
Asked by JC-842
Battery Ground Connection Location Needed
Where Does The Battery Ground Wire Connect?
Asked by wise.nichole
Van Will Not Start After Replacing Ignition Lock...
I Lost My Key And Had To Drill Out The Ignition Lock Cylinder And I Replaced It With A Dorman Ignition Lock Cylinder. But Now I Can't...
Asked by Jenfost42
Battery Draining
We Just Put A New Battery In The Truck. Every Time I Try To Start The Truck We Have To Jump Start It. We Checked The Alternator. No Lights...
Asked by Luckylo
Browse other repair topics
AlternatorBCMBatteryController Area NetworkElectrical Shut DownFuel SystemFuse PanelIgnition SwitchLightsMain Power RelayNo BusTIPM
Can’t find your issue?
Ask a new Dodge question
