REPLACE/REMOVE GASKET INTAKE MANIFOLD Questions

My Northstar V8 Has A Weak Mixture Rear Bank. It Was Missing On Cyl 3; I Replaced The Ignition Module And Plugs. The Miss Is Almost Gone...

I Can't Get The Engine Back In Timing. I Removed The Distributor To Replace The Intake Manifold Gaskets.

Where Can I Find Or Who Can Tell Me The Allowable Hours To Charge To Change Out The Two Plastic Cooling Hose Connectors On The Tension...

On 3.8 Fuel Injectors There Is A O-ring On The Bottom Where It Fits Into Intake. There Is Also A Thin Ceramic Or Plastic Ring What Is Its...

Ive Removed About 10 To 13 Bolts But It Wont Budge So I Must Have Missed A Few Can Some One Help Me With A Diagram Please

My Jeep(4.0 L)runs Very Rough From ±1200 To ±2500 Rpm. Idles Smooth Most Of The Time. As The Throttle Is Applied,the Engine Shakes & Is...

I Have An Intake Leak In My 94 Chevy Lumina Z34. 3.4 Dohc Automatic And Im Going To Attempt To Correct That By Replacing The Spark Plug...

How Do You Replace The Air Intake Manifold Gasket On A 1993 Oldsmobile Cutlass Supreme S On A 3.1 Liter V6 Engine?

So, My Fuel Trims Are All Messed Up, I Attached A Picture Showing What They Are At Idle, This Is Warmed Up. They Do Go Down To 8-14 While...

To Make A Long Process Short- I Removed Every Component That Would Keep Me Out From The Lower Intake Manifold--fuel Rail Assembly,ignition...