REPLACE/REMOVE IDLE AIR CONTROL Questions

Car Help

1998 FORD TAURUS
I Have A 1998 Ford Taurus 24v Dohc. It Was Running Fine And Than Just Shut Off. Almost Like When You Run Out Of Gas But I Was Not Out Of Gas...
1 ANSWER
Asked by Dlilley2016

Idling Problems

1995 SATURN SL1
I Have A 95 Saturn Sl1 And When I Run My Car It Wants To Idle Extremely High When I Push In The Clutch And Then When I Shut The Car Off It...
1 ANSWER
Asked by NaNa4775

New IAC Valve, Still Idles High

1998 FORD ESCORT
My Car Was Having Classic Signs Of Bad Iac Valve Such Has Revving To 2500-3000 Rpm, Stalling On Occasion And The Diagnostic Code Reader Said...
1 ANSWER
Asked by Amanda Gladson

Idle Air Control Valve?

2002 GMC SIERRA
Just Changed Out My Iac Valve. Do I Require A Computer Reset Or Will It Reset Automatically?
1 ANSWER
3 IMAGES
Asked by jimf

2000 Infiniti G20 IAC MOTOR

2000 INFINITI G20
Computer Problem 2000 Infiniti G20 4 Cyl Automatic 190 Miles I Have A G2o 2000 Infiniti, And I've Been Having Some Problems With It...
1 ANSWER
Asked by MCMEDIN

1997 Honda Accord

1997 HONDA ACCORD
My 97 Honda Accord 2.2ltr Non V-tech Is Accelerateing Eratically. When It Is In Park, It Will Accelerate From 1000 Rpm To 3000 Rpm...
1 ANSWER
Asked by killacole

2000 Dodge Caravan

2000 DODGE CARAVAN
Our Van Stalls And Hesitates When Started Cold, But When Warmed Runs Much Better, With Just A Hesitation Once In A While. We Replaced The...
1 ANSWER
Asked by malecr

1998 Plymouth Voyager Car Stopping

1998 PLYMOUTH VOYAGER
My Car Is Consently Stopping And Jerking Without Notice When I Try To Slow Down. This Is Causeing The Engine To Shuting Down. I Have...
1 ANSWER
Asked by dan4

2001 Chevy Cavalier Engin Idle

2001 CHEVROLET CAVALIER
Engin Starts At 2000 Plus Rpm And Idles At 1000 Rpm. If The Problem Is The Iac Valve What Is The Difficultly Of Installation Or Cleaning...
1 ANSWER
Asked by ken stein

1998 Pontiac Sunfire Idle Air Control Valve

1998 PONTIAC SUNFIRE
Going To Be Changing The Idle Air Control Valve On A 98 Pontiac Sunfire, 2.2l, Just Wondering If There Is Any Advice You Could Give On...
1 ANSWER
Asked by sawmaster88