CYLINDER HEAD VALVE COVER BOLT

I Am Changing My Valve Cover Gasket And Want To Make Sure I Don't Under Or Over Tighten The Bolt When I Put The Valve Cover Back On.

Hi, What Would Be The Proper Foot Pounds Torque On Bolts And Tightening Sequence On A 1999 Chrysler Sebring Lxi?

I Am Putting My Engine Together And Want To Know If There Is A Tork Requirement On The Bolts For The Valve Cover?

Electrical Problem 1991 Ford Ranger 4 Cyl Two Wheel Drive Manual 300.00 Miles My Truck Started Missing Like It Wasnt Running On All 4...

I Striped A Bolt On Mt Valve Cover And I Want To Know If I Can Still Drive It

Can't Get To 2 Bolts Of The Valve Cover Because They Are Covered By A Metal Tube Which I Believe Is Attached To The Injectors. My Repair...

Cant Seem To Get The Cam Cover Off On The Intake Side Of My 99 Grand Am 2.4 Four Cyl. Took Out Twelve Bolts From Top And Two From Power...

I Have All Bolts Removed On The Valve Cover On A2002 Mitsubishi Montero Sport 3.5 V-6 Two Wheel Drive, How Do I Remove It, It Seams Like...

The Repair Manual Says 80 In Lbs Is What The Valve Cover Bolts Should Be Tightened To. Other People Are Saying That It Should Be Snug Tight...

I Am Replacing The Valve Cover Gasket?