Chrysler Newport
Thermoquad Carburetor?
My Engine Is Getting Gas In The Oil Pan. The Carb Has Had A Kit Installed But The Problem Still Exists. The Net Has A Lot Of Info But I'...
Asked by itbroke
The Turn Signal Lights Do Not Flash?
The Signal Lights Do Not Flash But Do Turn On And Remain On For Each Turn Direction. The Flasher Has Been Changed. The Park And Headlights...
Asked by itbroke
Using HEI Ignition Swap From Chrysler's Ignition?
My Vehicle Is Seldom Driven. I Am Getting Frustrated With How It Eats Up Ignition Modules. How Long Should They Last Anyway? The Replaced...
Asked by itbroke
Gas In Oil Pan?
A Few Days Ago, We Noticed A Strong Smell Of Gas After The Engine Was Shut Off And Parked For A While. I Checked The Oil Level Yesterday And...
Asked by itbroke
The Wind Noise At Highway Speed Is Too Loud For...
Has Anyone Added One Sided Closed Cell Foam Tape To The Door Jambs To Fix This?
Asked by itbroke
No Oil Pressure
Lately I Started This Beast And Immediately Saw That The Oil Pressure Light Stayed On. I Shut It Off And Began My Search For The Problem....
Asked by itbroke
Muffler And Resonator Replacement
I Would Like To Replace The Muffler And Resonator On This Vehicle But The Original Has Been Replaced With An 18" Model. I Have Not Been...
Asked by itbroke
Wiring
This Vehicle Has Had Lean Burn Removed And I Noticed That Some Of The Old Ignition Wiring For The Former Dual Pickup Distributor Has Been...
Asked by itbroke
Valve Cover Torque
The Repair Manual Says 80 In Lbs Is What The Valve Cover Bolts Should Be Tightened To. Other People Are Saying That It Should Be Snug Tight...
Asked by Rubarb Rudebega
Ask a new Chrysler Newport question
