REPLACE/REMOVE CYLINDER HEAD Questions

High Idle After Cylinder Head Replacement At Nom Op Temperature Coolant At 192°f No Mil Maf Reading 9g/s At 1,800 Rpms Spec Is 4 To 7...

I'm Trying To Install An Aftermarket Radio And Amp, But I've Run Into The Craziest Problem. So After Figuring Out It Was A Dts And I...

Hey, I've Recently Just Purchased A New Head Kit For My 4m40t, I Just Wanted To Know With Replacing The Head Will I Have To Redo The...

Does Removing The Cylinder Head Require Any Special Tools?

I Have 2003 Chevy Silverado 1500. I’m Changing Out Cylinder Heads. The Cylinder Heads I Removed Was 706 I Got A Good Deal On One New 706...

I'm Having Issues With The Exhaust Manifold And The Bolts That Belong In The Back Side Of The Head. Had Head And Cams Replaced But Had A...

Wired All Up And My A/c Fan Won't Work, And My Light Freaks Out. Has Stock Sub.

So As You Know I Rebuilt My Cylinder Heads And It Started Up But Then Once It Warmed Up It Started Running Rough! So I Hooked My Code Reader...

I Have A Bent Valve On My Vehicle Listed Above From The Timing Belt Failure. I Need The Procedure To Remove And Reinstall The Heads After I...

Diagram Of Torque Specs Of The Entire Motor (rebuilding Motor). Easiest Way To Remove Head Safely Without Damage.