COMPUTER NO COMMUNICATION Questions
No CPU Connection To OBDII Scanner
The Power Light Is On The Obdii Adapter While Plugged Into The Usual Slot. But No Ecu Communication Is Established As Shown By The Bluetooth...
Asked by Jakevi
It Cranks But Won't Start
I Have No Spark!! Fuel Pres. Is Good. I Have Tested/replaced All Ign. Related Parts Up To The Spark Control Module In The Ecm. (i.e.- Crank...
Asked by bikeflyer
Lost Communication With ECM?
After Changing The Thermostat. Coolant Flange, Ect Sensor, And Updating The Coolant Hoses Based On Tsb, Bleeding, Now When Starting The Car...
Asked by bhamdoc1
2000 Isuzu Trooper Communication
I Cannot Establish Any Communication Through The Obd Port And My Otc Genisys Scanner. Any Ideas Where To Start?
Asked by Checkpoint
Pcm Won't Communicate To Pass Texas State Inspection
My Check Engine Light Was On Three Weeks Ago. It Was Code Po440. I Replaced The Gas Cap And Air Filter. My Neighbor Replaced The O2...
Asked by Hiidyhoney
1996 Jeep Cherokee Won't Start
Cranks But Will Not Start. No Spark. Check Engine Light Will Not Come On. Code Reader Will Not Communicate.
Fuel Gauge Does Not Work. Anti...
Asked by handbird
1996 Ford Thunderbird Wont Start
Car Cut Off- Had Towed Home.started Next Day- Drove It Again-cut Off And Had Towed Home---no Spark--hooked Up Scanner---no Link With Pcm--...
Asked by yogi129
No Start
We Replaced The Heater Core In My 1999 Lincoln Town Car. Once Everything Was Put Back Together The Vehicle Would Not Start. You Could Hear...
Asked by piddock
No Communication From Vehicle To ObdII Scanner
All Gauges Jump Around. Abs, Engine, Etc. Lights Come On. Engine Goes To Limp Mode. No Communication From Vehicle To Obdii Scanner.
Asked by Kymike
OBDii Non Communication
I Have Done A Number Of Repairs On My Vehicle, Including Replacing The Catalytic Converter And Both My O2 Sensors. However, I Cannot Pass...
Asked by rlbrubak