REPLACE/REMOVE SPROCKET CAMSHAFT Questions

1982 Lincoln Continental

1982 LINCOLN CONTINENTAL
Have Overhauled 302 Cid Engine - Replaced Camshaft & Lifters, Had Heads Rebuilt, Replaced Timing Chain & Sprockets, Etc. Compression Test...
6 ANSWERS
Asked by Zarifa

Toyota Camry Valve Damage?

TOYOTA CAMRY
Well, My 94 Camry ( 4 Cyl. 2.2) Had An Oil Leak, Which I Assumed Was Caused By A Faulty Camshaft Oil Seal, Because The Guy Who Sold Me The...
3 ANSWERS
Asked by JWSoper

Aligning Timing Camshaft Sprockets On Mitsubishi 3.0...

2003 DODGE STRATUS
I Sent Both Of Heads To Be Checked For Cracks And Cleaned. The Removal Process For The 3.0 Engine Doesn't Call For The Disassemble Of The...
5 ANSWERS
1 IMAGE
Asked by rlarr

Gents, I'm In The Middle Of A Water Pump Job On A...

2000 TOYOTA CAMRY SOLARA
Gents, I'm In The Middle Of A Water Pump Job On A Solara 4 Cyl W/the 5s-fe. Read Its A Non Interference Engine But Do Tdc W/sprockets And T...
1 ANSWER
Asked by Mac29

2005 Hyundai Santa Fe Camshaft Sprocket

2005 HYUNDAI SANTA FE
Hyundai Santa Fe 2.7. I Rotated The Left Camshaft Sprocket And It Jumped 8 Teeth Counter Clockwise, I Then Rotated It Clockwise Back To The...
1 ANSWER
1 IMAGE
Asked by dougkolste

1993 Mazda 626 Camshaft Sprockets Will Not Rotate

1993 MAZDA 626
Engine Mechanical Problem 1993 Mazda 626 6 Cyl Front Wheel Drive Automatic During A Timing Belt Replacement, The Crankshaft Sprocket...
3 ANSWERS
Asked by Digitalstorm

3.0 Ltr. Duritec V6

FORD F-150
1996 Ford Taurus 3.0 Duritec With 150,000 Miles And Decided To Change To Oil Pump Among Many Gaskets To Avoid Future Problems But It Is...
1 ANSWER
Asked by oyray

I Was Going Up A Steep Hill One Day And My Bronco 2...

1989 FORD BRONCO
I Was Going Up A Steep Hill One Day And My Bronco 2 With A 2.9 V6 Was Weak So The Automatic Crammed 2nd At About 5k Rpm And After I Got To...
1 ANSWER
Asked by Hillkord

I Recently Replaced The Head On My 2003 Hyundai 1.6...

2003 HYUNDAI ACCENT
I Recently Replaced The Head On My 2003 Hyundai 1.6 Liter Accent And I Have Dohc I Did Align The Marks On The Camshaft Sprockets With The...
1 ANSWER
Asked by njoehow

Aligning Crank And Cam Sprockets Without The Aid Of...

2005 SUBARU IMPREZA
I Was Preparing To Change The Timing Belt So I Pulled The Timing Belt Cover Off. Was Lining Up Notches By Turning Crank With The Belt On. As...
1 ANSWER
Asked by KRye