REPLACE/REMOVE LIFTER CAMSHAFT Questions
How To Replace The Lifter/cam Shaft?
I Have The Truck Listed Above, Another Lifter Has Gone Bad Again, Not Paying The Dealer To Replace Them. I’m Looking For Step By Step...
Asked by Chevymoneypit
Lifters
When Replacing Lifters Is It A Must To Replace The Camshaft Too? And Is There A Possibility To Clean The Lifter To Bring It Back To Life?
Asked by Ohyea
Cylinder #4 Misfire After Replacing A Collapsed Lifter...
Hello There, I Had A Collapse Lifter On Cylinder #4. I Took The Challenge To Do It On My Own And Everything Went Smoothly. I Made Sure There...
Asked by darkfreelife
Still Has A “lifter Ticking” Like Noise After...
Changed The Lifters In My Truck Listed Above 1500 And Now The Ticking Noise Is Still There. It’s Definitely Not As Loud But It’s Still...
Asked by Stryker627
2002 Jeep Wrangler Removing Lifters
I Have A 2002 Jeep Wrangler With An Inline 6 Cylinder Engine. It Started To Make A Tapping Noise From The Lifters. It's Really Noisy When I...
Asked by 12Paul12
1997 Honda Passport Changing Lifters
Engine Mechanical Problem
1997 Honda Passport 6 Cyl Automatic
I Am Going To Change The Lifters And I Was Wondering If There Was An...
Asked by lauralancaster
2002 Dodge Durango Rockers Not Tight Replaced Lifters
We Just Replaced The Lifters And The Rocker Are Shimmies Back And Forth. I Think The Spring May Be Shot But Don't Know What The Height Of...
Asked by Mejias2k
Can I Change Solid Lifters Over To Hydraulic Lifters?
I Have A 2008 Suzuki Sx4 With A 2.0l Engine, And Understand That The Lifters Need To Be Shimmed Every 30,000 Miles. I Also Own A 2002 Suzuki...
Asked by Kdzee
1987 Cadillac Deville Replacing Lifters
Should I Replace The Push Rods As Well As The Rockers When Replacing The Lifters?
Asked by hdrodnba
After Replacing Six Lifters Sometimes When I Start My...
Replaced 6 Driver Side Lifters And Oil And Oil Filter. He Also Put Different Rods With What's On Top Of Those Used In, Now It's...
Asked by ifisher
