REPLACE/REMOVE CAMSHAFT SENSOR Questions
Camshaft Position Sensor?
My Check Engine Lights Is On Code Says Cam Position Sensor This Is A 1995 Mazda B3000 3.0 4x4 Truck Question The Sensor Is At The Back Of...
Asked by Anonymous
After Replacing Crank Sensor And A Camshaft Sensor It...
I Recently Had The Car Looked At And Put Up Because The Check Engine Light On. The Mechanic Told Us We Need A Crank Sensor And A Camshaft...
Asked by Kailey
1997 Isuzu Rodeo Question Fuel System
Rodeo Will Not Start. Injecting Fuel Into Throttle Body Truck Will Start. Fuel Pressure Is >40psi But Well Not Start Normally. Have Change...
Asked by dickwrf
Camshaft Position Sensor Keeps Going Bad
I Have Replaced My Camshaft Position Sensor 5 Times In 5 Days. I Changed The Wires And It Still Goes Out. What Could Be The Problem?
Asked by Steve camp
Truck Was Running Well, Filled The Tank, Drove Home...
Truck Was Running Well, Filled The Tank, Drove Home Parked With Nose Up Hill, Will Not Restart, No Spark At Coil, Replaced Coil, Nothing...
Asked by cjmack
1999 Chevy Camaro
I Have A 1999 Camaro With A 3.8l V6. My Problem I That I Have This Ticking Soud Coming From On Or In My Engine. When I Start My Car...
Asked by joshfran2
Fixed Crank Seal And Cam Position Sensor And Now No...
I Recently Just Had My Cam Position Sensor Replaced As Well As My Crank Seal Behind The Harmonic Balancer Now The Car Will Not Start It All...
Asked by Og Jesse James
1999 Chevy Suburban K1500 138,000 Miles 5.7 L Vortec...
1999 Chevy Suburban K1500 138,000 Miles 5.7 L Vortec Engine
Vehicle Was Driving Perfectly, Accelerating Smoothly, Plenty Of Power Prior To...
Asked by Anonymous
Pontiac G6 P014 Code Error
I Have A 2006 Pontiac G6 And I Am Getting A P014 Code Error. I Have Replaced The Camshaft Sensor - Exh Position That Was Giving The Error...
Asked by bmills1202
2002 Intrepid Help!!!!!
I Own A 2002 Dodge Intrepid With A 2.7 At About 113,000 Miles. My Car Hesitates, Jumps Forward When I Press On The Gas, Makes Clunking...
Asked by swills414
