keyless entry doesnt work

GMC
Avatar
FAULKDIZZLE
  • MEMBER
  • 1 POST
i have a 2003 chevy blazer extreme...the battery in the keyless entry remote died, i have replaced the battery and it still isnt working...can someone help me out
Mar 21, 2006 at 6:43 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Advertisement
Avatar
BURRBRIAN
  • AUTOMOTIVE REPAIR CONTRIBUTOR
  • 158 POSTS
Hello, don't know if you are aware that you have to "program" the remote when you take the battery out. If it's not any different between a couple of years of age you should be able to do this.
Stand a couple of feet away from the drivers side and then press and hold down both lock and unlock buttons on remote until the locks start to cycle,(locking and unlocking themselves). You should be good to go after this. If it is a new fob you have to have the dealer program it to your vehicle. Hope this helps you out-or in, whichever the case may be! 8)
Mar 22, 2006 at 8:56 AM
Advertisement
Avatar
STRAILER
  • AUTOMOTIVE REPAIR CONTRIBUTOR
  • 54,178 POSTS
Good answer burrbrian . :wink:
Mar 22, 2006 at 4:03 PM