1998 Ford Explorer Won't Shift Into 4th

Avatar
BMINN5000
  • MEMBER
  • 1 POST
1998 FORD EXPLORER XLT
2 WHEEL DRIVE
4 SPEED AUTOMATIC WITH ELECTRONIC OD
4 LITER V6 106714 MILES
NO LEAKS, NO NOISES, RUNS GREAT, IT RUNS OUT GREAT JUST WONT GO INTO 4TH GEAR ANYMORE

4TH GEAR OD IS SELECTED BY PUSHING SWITCH AT END OF GEARSHIFT LEVER...TRANSMISSION CONTROL INDICATOR LIGHT ON INSTRUMENT CLUSTER FLASHES YELLOW ALL THE TIME...IT WILL NEVER GO INTO 4TH
Jun 23, 2007 at 5:29 AM
Advertisement
Avatar
2CARPRO JACK
  • ✓Experienced Mechanic
  • 11,533 POSTS
HAve the PCM scanned. Might have a code that will point you in the right direction. I have replaced a few of the switches/shift arm assemblies for this very problem. But the switch should be tested for proper operation first
Jun 24, 2007 at 2:09 AM

Suggested Repair

Scan the PCM for diagnostic codes, then test the overdrive switch on the gearshift lever for proper operation. If the switch fails, replace the switch or shift arm assembly.

Conversation Summary

The owner of a 1998 Ford Explorer says it runs well with no leaks or noises but will not shift into fourth/overdrive, and the transmission control indicator light flashes yellow constantly. The expert advises scanning the PCM for codes and testing the gearshift overdrive switch before replacing the switch or shift arm assembly.

Add a reply
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.

Frequently Asked Problems for This Vehicle