POWER WINDOW MOTOR
WARNING:Failure to ensure regulator arms are in fixed position before removing window motor from regulator could result in personal injury.
NOTE:Window regulator and motor are removed as an assembly.
Removal & Installation (Doors)
Remove door trim panel, door radio speaker and watershield. Raise and support glass in full up position. Disconnect motor electrical connector. Remove window glass-to-regulator nuts.
Drill out rivets that attach motor and window regulator assembly to door. Remove motor and window regulator assembly.
Ensure regulator arms are in fixed position to prevent counterbalance spring unwind when motor is removed. Remove motor from regulator assembly.
To install, reverse removal procedure. Use heavy-duty riveter to install new rivets. Cycle door glass to ensure gear engagement.
Tuesday, July 21st, 2020 AT 5:42 PM
(Merged)