SPONSORED LINKS

Wont crank over

Tiny
WLHILLIARD
  • MEMBER
  • 2008 CHRYSLER SEBRING
  • AUTOMATIC
  • 85,000 MILES
Hey, my car wont start! The battery, altenator, and starter are all good. When I put my key in to the ignition and turn it, the engine does nothing. Some light on the cluster come on. The security light flashes, and the check engine light flashes, then the check engine becomes solid! Ive checked all the fuses but idk what's going on!
SPONSORED LINKS
Monday, December 2nd, 2013 AT 2:05 PM

1 Reply

Tiny
KEN L
  • MASTER CERTIFIED MECHANIC
  • 47,256 POSTS
The fact that the security light is flashing is telling you the system in armed not allowing the engine to crank over. Try locking and unlocking the car using the remote this should reset the system. If it does not try the spare key in the ignition and finally hard reboot the system by removing the negative battery cable and hold it to the positive terminal to discharge the capacitors in the system.

https://www.2carpros.com/articles/how-to-reset-a-security-system

Please let us know what you find. We are interested to see what it is.

Cheers, Ken

SPONSORED LINKS
Was this
answer
helpful?
Yes
No
-1
Sunday, December 24th, 2017 AT 3:12 PM

Please login or register to post a reply.

Related Engine Not Cranking Over Content

Starter Not Working
GUIDE
Starter Not Working
This guide is designed to help you identify whether the issue with your non-working starter motor is due to an electrical problem or a fault within the starter motor itself...
VIEW MORE

Sponsored links