SPONSORED LINKS

Why won't my car start?

Tiny
TYLER2020
  • MEMBER
  • 2003 HONDA ACCORD
  • 99,000 MILES
So I was doing an srs diagnostic on my car after watching a youtube tutorial. I received the codes, and all seemed ok. However, when I tried to start my car, it wouldn't start. The guy in the video said if you don't jump the correct components, this could happen. He said it could be blown fuses or any other electrical component. My fuses seem to be fine. I believe I did jump the correct components because I received two codes. So do you have any idea why my car won't start? When I turn the key, the lights come on, there is no clicking or any sound. Please help.
SPONSORED LINKS
Sunday, February 26th, 2012 AT 12:50 AM

11 Replies

Tiny
BILLYMAC
  • MECHANIC
  • 2,204 POSTS
Recheck all fuses and if no prob remove neg cable for a min and reconnect retry
Was this
answer
helpful?
Yes
No
Sunday, February 26th, 2012 AT 1:02 AM
Tiny
TYLER2020
  • MEMBER
  • 6 POSTS
That didn't work. Any other suggestions?
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Sunday, February 26th, 2012 AT 1:44 AM
Tiny
TYLER2020
  • MEMBER
  • 6 POSTS
The car doesn't make any noise when I try to start it. It doesn't try to turn over or anything. All the lights come on, so I know it's not the battery.
Was this
answer
helpful?
Yes
No
Sunday, February 26th, 2012 AT 1:47 AM
Tiny
BILLYMAC
  • MECHANIC
  • 2,204 POSTS
I was not suggesting it was thebatterry. If you remove the cable the computer will reset and maybe start your car
Was this
answer
helpful?
Yes
No
Sunday, February 26th, 2012 AT 1:56 AM
Tiny
TYLER2020
  • MEMBER
  • 6 POSTS
Ok, tried it and it didnt work
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Sunday, February 26th, 2012 AT 1:58 AM
Tiny
TYLER2020
  • MEMBER
  • 6 POSTS
Any other suggestions?
Was this
answer
helpful?
Yes
No
Sunday, February 26th, 2012 AT 1:58 AM
Tiny
BILLYMAC
  • MECHANIC
  • 2,204 POSTS
Yes troubleshoot the elec system have someone try and crank hold key in crank position use a test light go to the starter the single wire should light the light when you try to crank if it does not check same thing at neutral safety switch if light works there put in neutral try and start if starts ns switch failed. Replace it.
Was this
answer
helpful?
Yes
No
Sunday, February 26th, 2012 AT 2:02 AM
Tiny
KHLOW2008
  • MECHANIC
  • 41,814 POSTS
You could have triggerred the security system which is preventing it from starting. Is the security light in dash blinking when you try to crank?

Is the gear shift P or N indicator light showing?
Was this
answer
helpful?
Yes
No
+1
Sunday, February 26th, 2012 AT 10:58 AM
Tiny
TYLER2020
  • MEMBER
  • 6 POSTS
I am about to check that. If this is the case, what would be the fix?
Was this
answer
helpful?
Yes
No
Sunday, February 26th, 2012 AT 6:04 PM
Tiny
TYLER2020
  • MEMBER
  • 6 POSTS
So I went to an autozone, and they believe it is a problem with the immobolizer. Are you able to reset the immobolizer?
Was this
answer
helpful?
Yes
No
Sunday, February 26th, 2012 AT 7:02 PM
Tiny
KHLOW2008
  • MECHANIC
  • 41,814 POSTS
You would need appropriate scan tool to reset the immobilizer.

If you have a spare key, try using it to see if it works.
Was this
answer
helpful?
Yes
No
Monday, February 27th, 2012 AT 12:48 PM

Please login or register to post a reply.

Related Engine Not Running Content

How to fix an engine that wont start
VIDEO
How to fix an engine that wont start
Instructional repair video
Engine Not Starting
GUIDE
Engine Not Starting
Over the past 20 years at 2CarPros we have identified the top problems that are easily fixed. This guide can save you a trip to the repair garage or calling a tow truck and...
VIEW MORE

Sponsored links