How do you replace a blower motor?

Hello,

Here is a guide to help walk you through the steps and help test the blower motor to see if it is bad with diagrams below to show you how on your car.

https://www.2carpros.com/articles/how-to-test-an-automotive-hvac-system-blower-fan-motor-a-detailed

It looks like the blower motor housing need to be remove to do the blower motor. Check out the diagrams (Below). Please let us know if you need anything else to get the problem fixed.

Hi there,

No I believe that it will with draw from hearer box. Remove glove box and trim, look under heater box there are 3 (i think ) screws and the electrical loom, undo plug and screws and motor should come down
Have a close look as you undo it and don't force anything an I feel that it will come out.

Mark (mhpautos)

Hi there,

you should be able to access the blower motor once you remove the glove box, it may just have leaf litter fouling the fan, this is fairly common problem.

Mark (mhpautos)

The best approach is to use the car repair link in this thread or get a Haynes manual. This is a complicated sequence of removal, so an actual step by step procedure would be best.

There are two fans, disconnect power connector to fan (one at a time) to isolate which fan is making noise.

Cooling fan should have 4 bolts, one on each corner. AC fan will require removing the grill.

Follow below instructions

www. .com