Blend Door Actuator?

Tiny
RACHELDART
  • MEMBER
  • 1 POST
  • 1999 CHEVROLET TAHOE
  • 0.5L
  • V8
  • 2WD
  • AUTOMATIC
  • 256,000 MILES
Replacing it under dash driver side. It’s on and wires connected but the metal arm with a gromlet won’t stay inside the circle keeps coming out. I do see the gromlet is wore out. What do I do here?
Was this
answer
helpful?
Yes
No
Thursday, September 24th, 2020 AT 10:35 AM (Merged)
Tiny
ASEMASTER6371
  • MECHANIC
  • 52,797 POSTS
Good afternoon,

Is this the door that you have? Can you post a picture of what you see? Check out the diagrams (Below). Please let us know if you need anything else to get the problem fixed.

Roy
Was this
answer
helpful?
Yes
No
+2
Thursday, September 24th, 2020 AT 10:35 AM (Merged)
Tiny
DAMES
  • MEMBER
  • 1 POST
  • 1999 CHEVROLET TAHOE
  • 5.7L
  • V8
  • 4WD
  • AUTOMATIC
  • 200,000 MILES
When I push the A/C button the blend door actuator rotates to open the heat door.
Was this
answer
helpful?
Yes
No
Thursday, September 24th, 2020 AT 10:35 AM (Merged)
Tiny
KEN L
  • MASTER CERTIFIED MECHANIC
  • 48,395 POSTS
Hello,

What happens is the electronics inside the actuator go bad creating this issue. here is a guide to help you fix the problem:

https://www.2carpros.com/articles/replace-blend-door-motor

Please run down this guide and report back. Can you please shoot a quick video with your phone so we can see what's going on, that would be great. You can upload it here with your response.

Was this
answer
helpful?
Yes
No
Thursday, September 24th, 2020 AT 10:35 AM (Merged)

Please login or register to post a reply.

Sponsored links