1999 Chevrolet Suburban cranks over, no start

Tiny
MR GRUMPS
  • MEMBER
  • 1999 CHEVROLET SUBURBAN
  • 193,654 MILES
My truck ran fine one morning. Went home for couple hours then started truck no problem. Drove around corner (about 100ft)then truck shut off n won't start since. I just recently put in new fuel pump/filter, spark plugs /wires, distributor cap/rotor, control module and coil. It sounds like it wants to start but won't. I get no spark at #1 piston, good spark at #3 and weak spark at #5. What is causing this?
Sunday, August 11th, 2013 AT 3:01 PM

5 Replies

Tiny
WRENCHTECH
  • MECHANIC
  • 20,761 POSTS
What engine do you have?
Was this
answer
helpful?
Yes
No
Friday, October 4th, 2019 AT 3:45 PM
Tiny
MR GRUMPS
  • MEMBER
  • 4 POSTS
It's a 1999 Chevrolet suburban 1500 2wd w 5.7liter engine
Was this
answer
helpful?
Yes
No
Friday, October 4th, 2019 AT 3:45 PM
Tiny
WRENCHTECH
  • MECHANIC
  • 20,761 POSTS
Having spark on some cylinders and not others is very odd. About the only place that can happen is the dist cap or wires. I would be more suspicious of the way you are testing. You should be using an adjustable spark tester so you can see how far the spark will jump.
Was this
answer
helpful?
Yes
No
Friday, October 4th, 2019 AT 3:45 PM
Tiny
WRENCHTECH
  • MECHANIC
  • 20,761 POSTS
You also want to see what the exact fuel pressure is. This engine is very pressure sensitive.
Was this
answer
helpful?
Yes
No
Friday, October 4th, 2019 AT 3:45 PM
Tiny
MR GRUMPS
  • MEMBER
  • 4 POSTS
Thanks, I'll check fuel pressure next. I'll get an adjustable spark tester n retest. I used the tester that lit up wen I tested. I'll get back to you asap. Thanks again for your input
Was this
answer
helpful?
Yes
No
Friday, October 4th, 2019 AT 3:45 PM

Please login or register to post a reply.

Sponsored links