Blower motor relay location

Tiny
RASMATAZ
  • MECHANIC
  • 75,992 POSTS
Cut it off and put an inline fuse and running it somewhere else.
Was this
answer
helpful?
Yes
No
Monday, September 24th, 2018 AT 4:17 PM (Merged)
Tiny
SCRAIG22361
  • MEMBER
  • 16 POSTS
Where do I put the inline fuse, and where would you route it?
Was this
answer
helpful?
Yes
No
Monday, September 24th, 2018 AT 4:17 PM (Merged)
Tiny
RASMATAZ
  • MECHANIC
  • 75,992 POSTS
Put the inline fuse with the wire that you cut and take it to the battery positive terminal-no experience in electrical bring it in. Are you sure it is not short circuit?
Was this
answer
helpful?
Yes
No
Monday, September 24th, 2018 AT 4:17 PM (Merged)
Tiny
SCRAIG22361
  • MEMBER
  • 16 POSTS
Thanks for the info!
Was this
answer
helpful?
Yes
No
Monday, September 24th, 2018 AT 4:17 PM (Merged)
Tiny
B4L23
  • MEMBER
  • 2 POSTS
  • 1998 FORD CONTOUR
Heater problem
1998 Ford Contour 6 cyl Two Wheel Drive Manual

i think my blower fan is sticking I woke up and it wouldnt work I gave it a nice smack and let it run for an hour or so and it seemed to be running fine but next time I turned on my car it wasnt working im trying to take it apart cuz it might be frozen or a bit warped but I dont know how to take it apart I got the glove box out and I cant seem to see where to go from there and there isnt much room to work with and its very hard to find a repair manual and I cant really afford to take it to a shop since I just had to replace an alt and battery and some other work any help would be great so I dont go blindly taking out the wrong thing thanks
Was this
answer
helpful?
Yes
No
Monday, September 24th, 2018 AT 4:17 PM (Merged)
Tiny
BMRFIXIT
  • MECHANIC
  • 19,053 POSTS
No need to remove glove box
remove under the glove box cover and remove blower motor that way
suspect bad blower motor and should be replaced
Was this
answer
helpful?
Yes
No
Monday, September 24th, 2018 AT 4:17 PM (Merged)
Tiny
B4L23
  • MEMBER
  • 2 POSTS
What do u mean glove box cover and the motor is fine when I can get it to start it works good its just getting it to start up I want to find out how to get to he fan blades to see if something is block them or if they are rubing
Was this
answer
helpful?
Yes
No
Monday, September 24th, 2018 AT 4:17 PM (Merged)
Tiny
BMRFIXIT
  • MECHANIC
  • 19,053 POSTS
The blower motor is not fine the brushes in side of it gone and it is not a serviceable item
you have to replace the blower motor the new motor should come with the fan on it
or you can keep on kick it until it stop working for good and then replace it
Was this
answer
helpful?
Yes
No
Monday, September 24th, 2018 AT 4:17 PM (Merged)
Tiny
MIA DESCHAIN
  • MEMBER
  • 1 POST
  • 1998 FORD CONTOUR
Heater problem
1998 Ford Contour

The heater blower only blows sometimes. Mainly at night it has been not working and when it does work at any time it is only blowing through the defrost vents. Can you give me an idea of what could be the problem?
Was this
answer
helpful?
Yes
No
Monday, September 24th, 2018 AT 4:17 PM (Merged)
Tiny
BLUELIGHTNIN6
  • MECHANIC
  • 16,542 POSTS
First check blower motor relay. If relay is okay, check blower motor resistor and blower motor itself. Also check for loose or damaged vacuum lines on the HVAC module, behind dash.
Was this
answer
helpful?
Yes
No
Monday, September 24th, 2018 AT 4:17 PM (Merged)

Please login or register to post a reply.

Sponsored links