Firing order - cylinder number one location needed?

Driver's side front. The 3.9L is a version of the 318 c.i with two cylinders chopped off. In 2005, the engine choices were 3.7L or 4.7L. Chrysler's numbering system is 1, 3, 5, front to rear on the driver's side, and 2, 4, 6, front to rear on the passenger side.

Most likely the spark plug socket you need is 5/8". Older engines used 13/16" spark plugs.

For others researching this topic, this article may be of help:

https://www.2carpros.com/articles/how-to-change-spark-plugs

This video shows this job being done on a Caravan:

https://youtu.be/CE7bM8_j4Zg

Check out the diagrams (Below). Please let us know if you need anything else to get the problem fixed.

Hello,

Here is the firing order for your car in the diagrams below. Check out the diagrams (Below). Please let us know if you need anything else to get the problem fixed.

Hi,
fig 1 is the routing of the ignition wires and the fig2 procedure how to install the distributor at correct timing, at the fig 2 you can see a notch on the distributor, rotor must face toward the notch, that means spark plug wire that located at the notch is the cylinder 1 wire. Also cylinder 1 must be at TDC compression.
Let me know if you need more help.

Flashing check engine light is engine misfiring
check it for tune up

Here you go

There's a notch in the body of the distributor that lines up with a corresponding tab on the bottom of the cap.

Firing order dodge V8 5.2L engine

There you go have a nice day

Hi:
Here is the diagram with the fireing order.

I hope this helps. Let me know if you have other questions.

Joe

Hello

Here is the info you requested Check out the diagrams (Below). Please let us know if you need anything else to get the problem fixed.