Electrical

Tiny
POLLYESTHER
  • MEMBER
  • 1991 TOYOTA CAMRY
  • 4 CYL
  • 2WD
  • AUTOMATIC
  • 150,000 MILES
My 1991 Toyota Camry has the light indicator on the dash that says there is a light problem. I know that my hazard lights don't work and neither does my horn, but all the other light work fine, I also know that both the horn and the hazards are on the same fuse in the fuse panel, but when I put a fuse in it kicks it in a few seconds. It may help you to know that it doesn't blacken the inside of the fuse but it just blows it.
Wednesday, March 2nd, 2011 AT 5:46 PM

5 Replies

Tiny
JDL
  • MECHANIC
  • 16,098 POSTS
Remove the horn relay, in place of the fuse, use a testlite between the fuse terminals. If the lite comes on, there is short to ground, then we start hunting. By using the testlite you don't blow all your fuses. The testlite should control the load enough not to overheat anything, but, use quickly. It's a start.
Was this
answer
helpful?
Yes
No
Wednesday, March 2nd, 2011 AT 6:09 PM
Tiny
POLLYESTHER
  • MEMBER
  • 3 POSTS
Would you happen to know where the horn relay is?
Was this
answer
helpful?
Yes
No
Thursday, March 3rd, 2011 AT 12:04 AM
Tiny
JDL
  • MECHANIC
  • 16,098 POSTS
It should be under the passenger side of dash. Note diagram.
Was this
answer
helpful?
Yes
No
Thursday, March 3rd, 2011 AT 3:41 PM
Tiny
POLLYESTHER
  • MEMBER
  • 3 POSTS
Thanks a lot. I will try that.
Was this
answer
helpful?
Yes
No
Friday, March 4th, 2011 AT 1:17 AM
Tiny
JDL
  • MECHANIC
  • 16,098 POSTS
Let us know what you find.
Was this
answer
helpful?
Yes
No
+1
Friday, March 4th, 2011 AT 3:57 PM

Please login or register to post a reply.

Related Hazard Light Not Working Content

VIEW MORE