Turn signal

Tiny
PAUKY123
  • MEMBER
  • 1984 CHEVROLET CAMARO
  • 2WD
  • AUTOMATIC
  • 42,000 MILES
I have a question about a turn signal on a 1984 camaro berlinetta the turn signal is a switch in the dash not in the steering column and when I hit the button to turn the right side on it flashed once and turns off I have to hold it to get it to flash like a turn signal shoould I already replaced the button and the other side works fine
Thursday, June 16th, 2011 AT 2:03 PM

10 Replies

Tiny
RASMATAZ
  • MECHANIC
  • 75,992 POSTS
Check the park/turn relay located inside light module
Was this
answer
helpful?
Yes
No
Thursday, June 16th, 2011 AT 2:25 PM
Tiny
DOCFIXIT
  • MECHANIC
  • 18,828 POSTS
How did switch get moved to dash?
Was this
answer
helpful?
Yes
No
Thursday, June 16th, 2011 AT 2:27 PM
Tiny
PAUKY123
  • MEMBER
  • 6 POSTS
The switch it stock in the dash its only in the camaro berlinettas 1983-1986 and where is the park turn relay I know you said the light module but I dont know where that is and could this be a fuse thanks in advance
Was this
answer
helpful?
Yes
No
-1
Thursday, June 16th, 2011 AT 2:33 PM
Tiny
DOCFIXIT
  • MECHANIC
  • 18,828 POSTS
Dash
Was this
answer
helpful?
Yes
No
Thursday, June 16th, 2011 AT 2:38 PM
Tiny
PAUKY123
  • MEMBER
  • 6 POSTS
So the drivers side under the dash? Is it near the fusebox thanks for the help
Was this
answer
helpful?
Yes
No
Thursday, June 16th, 2011 AT 2:43 PM
Tiny
PAUKY123
  • MEMBER
  • 6 POSTS
Where could I find one of these light control modules?
Was this
answer
helpful?
Yes
No
-1
Thursday, June 16th, 2011 AT 6:11 PM
Tiny
DOCFIXIT
  • MECHANIC
  • 18,828 POSTS
Boneyard going to be difficult maybe Year One
Was this
answer
helpful?
Yes
No
Thursday, June 16th, 2011 AT 6:20 PM
Tiny
PAUKY123
  • MEMBER
  • 6 POSTS
Ok is it on the right side of the passenger dash or the right side of the driver dash?
Was this
answer
helpful?
Yes
No
Thursday, June 16th, 2011 AT 6:22 PM
Tiny
DOCFIXIT
  • MECHANIC
  • 18,828 POSTS
Pass side next to ECM
Was this
answer
helpful?
Yes
No
Thursday, June 16th, 2011 AT 6:26 PM
Tiny
PAUKY123
  • MEMBER
  • 6 POSTS
Today I thought I unplugged all the wires to the light control module and I hit the blinker and the side that woundnt stay on worked fine and now the left side doesnt work at all. Plugged them back in and the right side you have to hold to get to stay on and the left works fine now im confused. HELPPPPP!
Was this
answer
helpful?
Yes
No
Sunday, June 19th, 2011 AT 12:58 AM

Please login or register to post a reply.

Sponsored links