OLDSMOBILE CYLINDER HEAD

Engine Mechanical Problem 1995 Oldsmobile Cutlass 6 Cyl What Are The Torque Settings For Head Bolts On A 1995 Olds Cutlass Supreme 3...

Popping Noise Coming From Engine Area When You Let Off The Gas. Can Only Hear It When Hood Is Up. Sputters Very Lightly At Red Lights...

I've Changed The Coolant W/a Better&higher Quality Coolant & Replaced Therm( 180 Degrees)-but The Was"supposed Work Done On Heads Prior To...

3.1l V6 80,000 Miles Have Replaced Oil & Filter Every 5,000 Miles. Am Surprised That Lifters Are Leaking / "bleeding". Cold Strartup Has...

How Cam I Tell If My Head Is Gone Bad

Attached Is A Picture Of A Water Pipe Connection. How Do I Open This Connection? This Line Runs From The Front Right Of The Block, Across...

When Replacing Cylinder Head Gasket Are Pushrods Intake And Exhaust All The Same Size If 2 Rods Get Mixed Up While Installing Them Will It...

Our 02 Silhouette Kept Overheating And Would Smell Of Antifreeze. In Idle It Would Keep A Constant Temperature At Times And Other Times It...

I Have A 97 Olds Bravada V6 With 130,000 Miles. My Fuel Milliage Went Way Down To 6 Mpg. The 1, 3, And 5 Plugs Get Fouled With Black Soot...

I Own A 1988 Oldsmobile Regency 98. There Is Some Sort Of A Leak In The Engine Which Causes The Radiator Fluid To Drain In A Matter Of...