Mercury Sable EGR Valve Sensor
Browse Mercury Sable EGR Valve Sensor questions and answers. Choose a question that matches your symptoms.
10 discussions
Had To Change The Egr Sensor Now Car Cranks With No...
Had To Change The Egr Sensor Now Car Cranks With No Hesitation But Starts Popping Like It Is Getting Air, I Checked All Hoses Connected To...
Asked by denise2981
2002 Mercury Sable Backpressure Sensor
I Need To Know What Causes A Egr Backpressure Valve Sensor To Overheat And Melt The Part Where The Hoses Connect To , But Did Not Harm The...
Asked by michelle1972
2002 Mercury Sable EGR
2002 Mercury Sable 6 Cyl Automatic 69,000 Miles
I Had My Converter Replaced, My Intake Manifold Replaced, Solenoid Replaced, And The...
Asked by cliscano
2002 Mercury Sable EGR Backpressure Sensor Hose
The Egr Backpressure Sensor Hose Melts From The Heat Of The Exhaust. It Got So Hot That It Melted One Of The Plastic Connectors On The...
Asked by dhb3855
Mercury Sable 2002 95000 Miles
My Car Has Low Egr Flow. Pulled Line From Valve And No Vacumme At 2000 Rpm. Vacume At Selenoide.
Powered Solinide Vacume At Egr Valve...
Asked by JoeSack
1998 Mercury Sable Egr Flow,chged Valve @sensor
Emissions ..egr Flow Insufficent, Changed Valve,and Sensor, Have 12 Vdc @sensor. Check Hoses For Blockage-ok,have Good Suction With Valve...
Asked by cameraman
1997 Mercury Sable EGR Pressure Feedback Sensor
Electrical Problem
1997 Mercury Sable Engine Size Unknown Two Wheel Drive Automatic 100000 Miles
Had Malfunction Code P0401. Was Told...
Asked by dbehnke
1996 Mercury Sable Trying To Find My DPFE Sensor Or...
Hi, I Received An P401 Code And Got The Egr Valve Replaced (tried Cleaning It But Still Go The Code). I Read That The Next Thing To Test...
Asked by flipriggs
1995 Mercury Sable EGR Valve
I Had The Egr Pressure Sensor Valve Replaced Almost 3 Weeks Ago. It Had Burned Up. It Is Burning Up Again. What Would Cause This And Do I...
Asked by kathy1951
1993 Mercury Sable EGR Sensor Circuit Code Error
The Car Has A 3.8l Engine And It Running Rough. I Ran A Code Checker On It And Got A Message Saying The Egr Sensor Circuit Voltage Higher Or...
Asked by bdg1701
Browse other repair topics
Can’t find your issue?
Ask a new Mercury Sable question
