Mercury Engine
Browse Mercury Engine questions and answers. Choose a question that matches your symptoms.
2,574 discussions
No Compression In Cylinder Six
Clean Intake Plum From Carbon Deposits. Is Possible For Carbon To Break Off While Cleaning And Wedge The Intake Valve And Exhaust? There Is...
Asked by westruck
No Compression In Cylinder Number Six
Check Compression In Cylinder Number 6 No Compression Reading. I Did The Wet Test No Reading. What Might Be The Problem?
Asked by westruck
Misfire After Replacing Plenum Gasket
Changed Intake Plenum Gasket Engine Began To Misfire After Start Up.
Asked by westruck
Does Not Start
When Trying To Start Car Should I See Gas Going In The Carburetor And If So About How Much. Can’t Get It To Start. Mechanical Fuel Pump.
Asked by Starlord1976
Cranks No Start
Car Turns Over But Will Not Fire Up. Distributor Cap And Rotor Are New, Clean And Dry. Previously, For The Past Few Months, I Have Had To...
Asked by Jerry Ross2
Electrical Issues After An Engine Swap
I Had An Engine Swap. My Ignition Switch Was Funny To Get The Key In And Out, So My Mechanic Switched My Ignition After The Engine Swap. Now...
Asked by Josh Velez
Bad Mecury
The Starter And Soilanoid Have Been Replaced . Everthing Works Good For A While. Then The Only Way To Start It Is Jump The Soilnoid ....
Asked by putz-2015
No Start
Working On My Dads Vehicle, It Started A Few Weeks Back With His Car Not Starting In A Store Parking Lot. Got Him Towed Back To The House...
Asked by Beastmode24
Browse other repair topics
SymptomsAir FilterAir Intake Temperature SensorAir Intake TubeBlockCamshaftComputerCrankshaftCrankshaft PulleyCylinder HeadFlywheelHarmonic BalancerIdle Air ControlIntake ManifoldInterchangeKnockMAP SensorMass Air Flow SensorMountOil LeakOil ChangeOil Fill CapOil FilterOil PanOil Pressure SensorOil PumpOxygen SensorPistonRebuildReplace/RemoveSerpentine BeltStarterSuper ChargerThrottle BodyTiming BeltTiming ChainTune-upVacuum Hose DiagramWiring
Can’t find your issue?
Ask a new Mercury question
