Mazda Ignition
Browse Mazda Ignition questions and answers. Choose a question that matches your symptoms.
328 discussions
1991 Mazda B2200 No Ignition
1991 Mazda B2200, Carburetor Engine, Auto Trans, 123,000 Miles. After The Truck Has Sat For A While, Most Of The Time It Will Start Right...
Asked by jonnielazy
Timing Is Off By A Lot
Could I Set My Cam Timing At Tdc Take The Belt Off And Set My Crank At Tdc To Set Timing? It's Too Off To The Point Where Nothing Else...
Asked by tools4u
Wires Have Been Cut
The Four Wires That Go To The Plug That Plugs In The Distributor I Need To Know The Way That They Hook Back Up. I See The Color Coming From...
Asked by Erk Kits
Ignition Control Module
Where Is It? I Have Looked And Searched All Over The Internet And The Auto Stores And My Repair Book With No Luck. I Just Want To Find The...
Asked by Aaron Reed
Keeps Blowing Ignition Fuse Under Steering Wheel
I Tuned It Up Put New Fuel Pump .we Can Drive It Cut It Off Then It Acts Won't Crank I Find Blower 15 Amp Fuse I Put A 20 Amp In It Tried To...
Asked by Kristie roden
Can Yall Tell Me The Firing Order?
I Have A 1990 Mazda B2600 I Got New Wires, Spark Plugs, And Cap And Rotor. But When I Start It It Sounds Like It Has No Power. Can Yall Tell...
Asked by nathan59
I Need To Know If The Coil I Have Is Bad.
The Coil Has 2 Wires Going To It,with The Coil Unpluged And Key On One Reeds 12v,the Other Reeds 0v With It Pluged Up Both Reed 12v,is This...
Asked by death1110
Swapped Out The Distributor And Wanted To Ask What The...
Hi Guys - Working On A 1990 Mazda 323 1.3l Petrol Engine. I've Just Swapped Out The Distributor And Wanted To Ask What The Ignition...
Asked by frank@frankh.ie
Mazda
How Can I Check To See If My Igniter Is Working On My 1990 Mazda 929 3.0 Liter
Asked by godssondmx
Browse other repair topics
Can’t find your issue?
Ask a new Mazda question
