Mazda Engine

Browse Mazda Engine questions and answers. Choose a question that matches your symptoms.

3,598 discussions


Top Idler Pulley Removal?

1999 MAZDA MILLENIA
Hello, So, I Have A Somewhat Complex Issue. I Am Changing The Top Idler Pulley, The Top Bolt That Holds The Bracket Is Almost Rounded Off...
3 ANSWERS
3 IMAGES
Asked by mstormin919

Timing Belt Broke

1999 MAZDA B2500
Timing Belt Broke, We Replaced The Thermostat,belt,plugs And Wires But The Truck Loses Power In 4th And 5th Gear And Revs Really High When...
1 ANSWER
Asked by Jamiegilliam06

After Replacing A Broken Timing Belt, The Engine Loses...

1999 MAZDA B2500
The Engine Losing Power In 4-5 Gear And Idles High When Clutch Is In, Just Replaced Broken Timing Belt.
1 ANSWER
Asked by Jamiegilliam06

How Many O2 Sensors Does This Truck Have?

1999 MAZDA B4000
How Many?
1 ANSWER
1 IMAGE
Asked by 1Happy1

Engine Cranks But Does Not Start

1999 MAZDA PROTEGE
The Car Will Turn Over But Not Start. I Don't Have Any Dash Lights That Normally Come On.
1 ANSWER
1 IMAGE
Asked by Watts1975

Code 106 For MAP Sensor

1999 MAZDA PROTEGE
Have A Code 106 Map Sensor Circuit Out Of Range Or Maybe Map Sensor Replace. That Is The Only Code. I Had The Code Before.
3 ANSWERS
3 IMAGES
Asked by williamdaise

Car Not Starting

1999 MAZDA 626
Where Fuel Filter Is Located?
1 ANSWER
2 IMAGES
Asked by Yvonne Collins2

Engine Stumbles When Applying The Brakes

1999 MAZDA 626
The Car Runs And Stumbles When You Put The Brakes On.
3 ANSWERS
1 IMAGE
Asked by Johnnyp43

Poor Gas Mileage

1999 MAZDA B3000
My Truck Is Having Serious Gas Mileage Problems And It Has Been Happening Ever Since I Got The Truck. It Has No Check Engine Light And The...
1 ANSWER
6 IMAGES
Asked by Conradd72

Not Cranking

1999 MAZDA 626
She Was Cranking After Sitting Up For A While, Then It Rained While The Engine Hood Was Up, And Now There's No Buzzer, No Lights...
1 ANSWER
Asked by Pamela Smith

Browse other repair topics

Browse by repair topic
SymptomsAir FilterAir Intake Temperature SensorAir Intake TubeBalance ShaftBlockCamshaftComputerCoverCrankshaftCrankshaft PulleyCylinder HeadTickDrain PlugEstimateFlexplateGround StrapHarmonic BalancerIdentificationIdle Air ControlIntake ManifoldInterchangeKnockMAP SensorMass Air Flow SensorMountOil LeakOil ChangeOil CoolerOil Fill CapOil FilterOil PanOil Pressure SensorOil PumpOxygen SensorPistonRebuildReplace/RemoveSerpentine BeltStarterSuper ChargerThrottle BodyTiming BeltTiming ChainTune-upTurboVacuum Hose DiagramWiring

    Can’t find your issue?

    Ask a new Mazda question