Jeep Wrangler P Codes (Powertrain)
Browse Jeep Wrangler P Codes (Powertrain) questions and answers. Choose a question that matches your symptoms.
17 discussions
Code P0303, Misfire?
Got A P0303 Code, So Far, I Have Changed The Coil, Plugs, Plug Wires. Ran Fine After Sat For A Day Started Up And Threw The P0303 Code Again...
Asked by Djmeatman
Check Engine Light On And Code P0430
Check Engine Light Came After Purchase. Filled With Gas A Light Came On 2 Miles Down The Road. It's Not Sluggish Or Anything, Just The...
Asked by Randy2020
P0157 Code?
I Checked And Am Getting The Following Diagnostic Code: P0157 Are These Problems I Can Fix Or Should I Take My Vehicle To A Mechanic?
Asked by seadad97
Trouble Code Issue
P0300 Random/multiple Cylinder Misfire Detected.
Please Help Me Solve This.
Asked by ogbeauto
P0883 – TCM Power Output High
2007 Jeep Wrangler Sahara Unlimited With 42re Automatic Transmission - I Am Getting A Check Engine Light Code Of P0883 – Tcm Power Output...
Asked by dbq
2007 Jeep Wrangler Trouble Codes P0300, P0132
I Have Had A Crack In The Exhaust Mfld For Some Time. I Thought I Fixed It But Did Not Replace The Gasket, Put On New Gasket. I Am Now...
Asked by dsp
Po344 Code On Jeep
I Have A 2006 Jeep Wrangler2.4 Liter With A Engine Light On And A Po344code. Already Had Cam Sensor And Crank Sensor Replaced. New Spark...
Asked by ronnie skiles jr.
2005 Jeep Wrangler Engine Codes
I Recently Got The Following Engine Codes: (i Use A Product Called The Scanguage Ii For Reading The Codes)
P0016 ( Crankshaft Position...
Asked by bfng3569
Code P0503?
Bumping And Hesitating Has Lessened, But When Idling The Jeep Runs At About 2300 To 2800 Rpm. Way Up From The Usual 500-700. I Now Get An...
Asked by jagraves2
P0301 And P0306 Codes
Initially We Had A Code That Said The O2 Sensor Was Bad. Drove For A Couple Of Weeks Now The Two Codes (301 And 306) Come Up But Nobo2...
Asked by JeepsEdge
Browse other repair topics
Can’t find your issue?
Ask a new Jeep Wrangler question
