GMC Sierra Repair Questions and Answers
BodyBrakesClimate ControlDrivetrainElectricalEmissionEngineEngine CoolingExhaustExterior LightFuel SystemGeneralIgnitionInteriorSafetySecuritySteeringSuspensionTiresTrouble CodesWarning Lights
Sulfur Smell
For About Two Months I Have Had A Pretty Strong Sulfur/rotten Egg Smell In My Truck. The Smell Comes And Goes But Seems To Get Stronger When...
Asked by justinblanton
Right Rear Turn Indicator Failed
Right Turn Signal Will Blink Normal Three To Four Times Then Will Begin Blinking Fast (as If One Of The Bulbs Were Out), And A Message Pops...
Asked by 90Silverado
Spongy To No Brakes And No Power Steering At Idle
Brakes Spongy Or Going To Floor. Bled Many Times With New Hydro Boost. And Master Cylinder And Calipers, Pads, Rotors. Also Power Steering...
Asked by fstone22
Blower Fan Only Works On High Speed
Blower Fan Will Only Work On High Speed. Also A/c Won’t Work. Thought It Might Be Related To Blower Problem. When A/c Is Turned On Green...
Asked by Rodheide
Bled The Brakes But Brake Pedal Is Going To The Floor
I Wanted To Upgrade My Braking System With Newer Parts. So I Changed Out My Brake Calipers Rotors And Brake Lines. Bled The Brakes But Brake...
Asked by Jbricco32
Serpentine Belt Chirp Noise?
Only When Driving Between 15 Mph And 30 Mph When I Push On The Gas I Hear A Slight Bird Chirp As It Engages Into Gear But That’s The Only...
Asked by Thejayman32
Air Conditioner Will Not Turn Off
The Air Inside The Truck Won’t Turn Off Even If You Take Out The Keys. Air Is On High And Won’t Turn Off Unless You Disconnect The...
Asked by Karenbri
Power Steering Fluid Everywhere
My Power Steering Pump Started Squealing And Had A Minor Leak. Stop Leak Worked For A Little While. Now It Leaks Out Completely After...
Asked by gypsyoharre
Crank No Start
My Truck Has Recently Started Randomly Shutting Off While Driving It Will Just Shut Off. If I Wait A Minute Or Two It Will Fire Back Up And...
Asked by Giligan124
Transfer Case Stuck In Neutral
My Truck Listed Above Slt 1500 Is Not Moving At All. The Encoder Motor Is Off The Transfer Case. I Attempted To Manually Set Transfer Case...
Asked by Michael Frantz
Ask a new GMC Sierra question
